Quote:
Originally Posted by Ford62
I'm considering fitting headers/extractors to my '95 Probe.
Has anyone fitted a set of these, if so what were the pitfalls regarding access especially the rear bank manifold?
Are the ones on ebay any good?, as there are no Australian produced one available.
Or the other option, bite the bullet & have custom ones made.
Any advice will be welcome.
|
I'd imagine that because the Probe sold in the 1,000s and not 10,000s that there would be no Aussie products available off the shelf. Ebay might be the go.
Not sure of the fitment issues but i'd imagine the rear bank is semi-difficult at the least.
Design wise (primary/secondary diameters etc) as long as they are similar to something that works well on a 2.5L V6 Mazda ie MX6 626 V6 then it should work on yours too. Great sounding motor when revved!
Good luck
and enjoy!