Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 29-05-2010, 12:34 AM   #1
Jip
Starter Motor
 
Join Date: Apr 2010
Location: Mackay
Posts: 27
Default escort dipstick length

a mate of mine has a 72 escort with the 1.6litre motor. it doesn't have the original dipstick and we have no idea how much oil to put in it.

so my questions are:
how much does she take?
and how long is it from the bottom of the dipstick handle to the full and add lines?

we scouted the local wreckers but didn't have any luck.

Cheers,
Jip

Jip is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2010, 11:33 PM   #2
Les
Mk2 Racer
 
Les's Avatar
 
Join Date: Jun 2009
Location: Whyalla SA
Posts: 70
Default

410mm or 16" from top of dip stick tube to max level, 433mm or 17" to add level, 17,3/4" or 450mm total length of dip stick from top of filler tube.
If you can't find a dip stick PM me and I'll send you one.
If you make one use flexible tube such as a choke cable or hood catch outer cable, insert a 75 mm length of wire soldered in the bottom with it sticking out 50mm. and 100mm at top with a ring or hook to pull from.Make sure its soldered in to prevent it dropping inside. needs a 30mm long section at top 9mm thick with slight taper on bottom side to slip in tube to hold at level.
cheers,
Les
Les is offline   Reply With Quote Multi-Quote with this Post
Old 30-05-2010, 01:55 PM   #3
Jip
Starter Motor
 
Join Date: Apr 2010
Location: Mackay
Posts: 27
Default

it came with a home made dipstick made out of what looks like hood catch outer cable. but we didnt know the levels.

thanks Les so much. very helpful.
Jip is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 11:51 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL