![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | ||
Starter Motor
Join Date: Jun 2006
Posts: 1
|
I have a 1991 ford telstar. I just change the 2.0 DOHC Automatic engine, it is Ford engine too. That engine has 4 gear, i don't know why it is just can run until third gear, and the fourth gear almost cannot work. Anyone face this problem before? it is make me quite trouble now...
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
make sure all the auto wires are connected
reset the ECU oil levels perfect if no better the overdrive or end clutch has failed take the end clutch cover off and inspect the end clutch
__________________
My car goes Brumm Brumm |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
if you changed the auto gearbox over and the engine as well
the ecu to a different gearbox will be different ? you need the new gearbox ecu and all wired in to work it
__________________
My car goes Brumm Brumm |
||
![]() |
![]() ![]() |