|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
|
Thread Tools | Display Modes |
|
22-08-2011, 04:18 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
|
Hey guys.
My friend bought a 89 ea spack, manual, 3.9 The problem he is having is when the car gets to operating temperature and the thermostat opens up it runs like crap, coughs and splutters, But if he revs it over 2 grand the problem dissapears He has replaced alot of things. map sensor, thermo sensor,all of the vaccum lines etc Put a brand new thermostat in and it still does the same thing Even had the ecu looked out and theres nothing wrong with it. If any one would have a idea of what might be cuasing it, would be good
__________________
Welder/Fabricator at Beaudesert Exhuast Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors |
||
22-08-2011, 04:26 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Posts: 2,882
|
sounds like a ignition problem to me like the coil is stuffing up once it gets warm/hot
|
||
22-08-2011, 04:32 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
|
He has replaced the dizzy with a brand new one as well as the coil.
__________________
Welder/Fabricator at Beaudesert Exhuast Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors |
||
22-08-2011, 04:44 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: GEELONG
Posts: 7,946
|
does it have a worked cam in it if so it might be like my EL and run crap down low but once it gets over 2600 it goes way better
Jason
__________________
no longer have a ford but a ford man at heart R.I.P 98 EL MAY YOU HAVE A GOOD LIFE IN FALCON HEAVEN [SIGPIC][/SIGPIC]
|
||
22-08-2011, 05:41 PM | #5 | ||
FF.Com.Au Hardcore
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
|
Nope no cam all standerd,
__________________
Welder/Fabricator at Beaudesert Exhuast Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors |
||
24-08-2011, 12:50 AM | #6 | ||
Regular Member
Join Date: Jun 2006
Posts: 298
|
try placing your AU injectors in his car if its MPFI
had the same problem in my EA exhaust leaks ?, fuel pressure |
||
24-08-2011, 10:10 PM | #7 | ||
FF.Com.Au Hardcore
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
|
Will let him no, cheers
__________________
Welder/Fabricator at Beaudesert Exhuast Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors |
||