|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-05-2006, 09:24 AM
|
#1 | ||
|
Fantastic Plastic
Join Date: Jan 2006
Location: Mars most of the time
Posts: 2,019
|
OK, so i decided to get motivated this morning and wire up my extra driving lights on the auII , i decided that i wanted to add another switch inside the cabin hidden away so i can actually turn them off when i have my normal driving lights on if i whish ( i have them wired to come on with the parkers/headlights ) ...
This is where the problem begins - I cant even find a place to run a wire from inside the cabin to under the hood ? , i have looked near the pedals in the cabin and under the hood and noticed what lookis like a small tube sticking out of the firewall with a small rubber grommet blocking the end of it ( its a bit above where the steering comes through the firewall ) , seems to be a possibility to run it through there ? , but i looked inside the cabin again near the pedals and steering shaft and cant see the hole on the other side , there is like that thick foam stuff covering everything near the pedals on the firewall inside the cabin . question is - can i use the hole that has the grommet in it , and if yes - how the hell do you get to it from inside the cabin , is cuttin away some of the foam required , or is the hole visible but i just didnt see it ? , any help appreciated , thx
__________________
------------------------------------------------------------ :eclipsee_ |
||
|
|
|
05-05-2006, 09:26 AM
|
#2 | ||
|
PM me if you want
Join Date: Dec 2004
Location: Pk Ranger Modding - QLD 👍
Posts: 7,498
|
That hole is for the clutch cable, the wire should feed out the otehr side, if not poke a bit of coat hanger through first then the wire.
__________________
Owner of first ever car to retrofit BA SSS - the EA2BA Send me a PM if you want to know anything 2010 Ford Ranger PK High Rider (Auto) - 2011 Ford Fiesta (Auto)
|
||
|
|
|
|
05-05-2006, 09:30 AM
|
#3 | |||
|
Fantastic Plastic
Join Date: Jan 2006
Location: Mars most of the time
Posts: 2,019
|
Quote:
ahh , awesome , thanks for the fast response ;) - i was thinking of doing that but i wasnt sure what the hole was for ( i didnt wanna go poking into anything and damaging something ) .. so by what your sayin if i poke it from under the hood it should poke through the foam on the other side yeah , cheers
__________________
------------------------------------------------------------ :eclipsee_ |
|||
|
|
|
|
05-05-2006, 09:32 AM
|
#4 | |||
|
PM me if you want
Join Date: Dec 2004
Location: Pk Ranger Modding - QLD 👍
Posts: 7,498
|
Quote:
__________________
Owner of first ever car to retrofit BA SSS - the EA2BA Send me a PM if you want to know anything 2010 Ford Ranger PK High Rider (Auto) - 2011 Ford Fiesta (Auto)
|
|||
|
|
|
|
05-05-2006, 11:24 AM
|
#5 | ||
|
Fantastic Plastic
Join Date: Jan 2006
Location: Mars most of the time
Posts: 2,019
|
done
 , worked well , thanks again for the tip ;) ,
__________________
------------------------------------------------------------ :eclipsee_ |
||
|
|
|
URGENT ! - help need please .
Hybrid Mode