|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
|
|
05-02-2007, 11:11 PM
|
#1 | ||
|
eb xr666
Join Date: Oct 2006
Location: gold coast
Posts: 93
|
i just bought the stuff for my mpfi converstion the wrecker said it will work but im not sure so i need some opinions cheers
ive got all the under bonnet stuff of a EB series2 so fuel injection system off a 4litre going onto a 3.9 and a computer of a XH ute do you think this will work cheers in advance  : |
||
|
|
|
05-02-2007, 11:21 PM
|
#2 | |||
|
Regular Member
Join Date: Jan 2007
Posts: 37
|
Quote:
The EBII has a 3 pin TPS and the EA has a 2 pin TPS. It is easier to use EA MPFI harness, Throttle body, but use a 4.0 inlet manifold. You will have to change the fuelpump too, CFI and MPFI are different. The EA MPFI harness will plug into the plug for it at the firewall on the pass.side near the rear of the engine. There are 2 plugs there, one for the Injectors etc... and 1 for the tranmission harness to plug into. I hope this clears it up a bit for you. |
|||
|
|
|
|
05-02-2007, 11:27 PM
|
#3 | ||
|
eb xr666
Join Date: Oct 2006
Location: gold coast
Posts: 93
|
is there a way to bypass smart lock for this reason. can it be "flashed"?
|
||
|
|
|
|
05-02-2007, 11:31 PM
|
#4 | |||
|
Regular Member
Join Date: Jan 2007
Posts: 37
|
Quote:
|
|||
|
|
|
|
06-02-2007, 12:02 AM
|
#5 | ||
|
eb xr666
Join Date: Oct 2006
Location: gold coast
Posts: 93
|
is there any way to hook smartlock up in my car
|
||
|
|
|
|
06-02-2007, 02:21 PM
|
#6 | ||
|
Oops, I slipped....
Join Date: Dec 2004
Location: Adelaide, SA
Posts: 1,861
|
Yes, but it would be a lot easier to use an EA MPFI ECU. To fit smartlock you need to change the dash loom, BEM, fit the smartlock box, fit a smartlock cluster and a smartlock ignition barrel.
__________________
1995 EF Fairmont 5.0 Heritage Green - BTR with TCI 2500 stall - Ported E7's - Pacemaker Tri-Y's - 3" Mandrel-bent Lukey Exhaust 1984 XE S-Pack 250 Sno White - LPG - Single Rail - 2.5" Exhaust "Just because you don't understand something, does not make it wrong" |
||
|
|
|
|
06-02-2007, 11:22 PM
|
#7 | ||
|
eb xr666
Join Date: Oct 2006
Location: gold coast
Posts: 93
|
cheers , i took all the stuff back and got a refund anaway and decided im just gonna do the 5spd convo cause i had a bit of a play against a vt today and beat it so cfi cant be that bad
|
||
|
|
|
|
07-02-2007, 02:05 AM
|
#8 | ||
|
V8 Ute V8 Boat
Join Date: Aug 2005
Location: south australia
Posts: 1,804
|
i got a 4speed auto EA mp ecu in the shed u can have for a 6pac
__________________
VE SS Ute manual 09 AU XR8 UTE 200KW manual 02 Challanger Ski boat V8 01 125 Thumpster 2010 Swag All set for the weekend |
||
|
|
|
i hope it works
Hybrid Mode