Common Problems with the AU??

[mulletmun]

Originally Posted by Lil Monty

Missing AU Fairmont/ Ghia Climate control digital segments? It's an easy fix!!!

1.0 Tools Required;
1.1 Phillips head and flat blade screw drivers
1.2 Cloths iron
1.3 Baking paper

2.0 Remove climate control unit from dash;
2.1 Removing clock surround, allowing access to retaining screw, remove screw,
2.2 Pull unit forward and to the left, unplugging 1 air sensor and 2 electrical plugs.
2.3 Unit should now slide right out

3.0 Dis-assemble control unit;
3.1 Depress and pull plastic retaining legs where appropriate
3.2 Slide unit out rear of casing.

4.0 Re-attach control ribbon
4.1 Pre-heat iron to sub steam temperature
4.2 Clean/ trim ribbon and contacts if required (do not use solvent as will destroy ribbon/ adherence)
4.3 Re-align ribbon with circuit contacts
4.4 Place baking paper on top or ribbon to stop ribbon melting onto iron
4.5 With moderate pressure, press iron onto ribbon and contacts
4.6 Check contacts/ test in car before refitting into casing.

5.0 Re-assemble in reverse order

gday all, had a go at this today took all of about 15 mins, i didnt even do the ironing bit, just took it all apart, and cleaned the inside of the glass etc, fired it up and it has dots, etc that i didnt know excisted, sweet, cheers lil monty.