![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Regular Member
Join Date: May 2010
Location: Perth
Posts: 48
|
Hi all,
I want to add a USB for charging to my centre console under the heater controls. ![]() I've bought some blank replacements from Ford today (Was expecting them to cost $30 each, but only $5 each), and want to cut a hole in one, and glue a usb port into them. But I'm unsure about how to wire them, and how to go about the whole thing. Hoping someone here has done something similar. Another mod I'm planning on doing is hard wiring my dashcam's power to one of them blanks, but using a toggle switch similar to the rear window heater to switch it on and off etc., but having it powered only when the engine is running. Any help would be greatly appreciated ![]() |
||
![]() |
![]() ![]() |