Bleeding brakes need urgent assistance

[Suh401]

Hi guys,

I have just bleed my brakes I was advised to do the following.

- Undo all four bleeding screws pump the pedal drain all the fluid.
- refit the bleeding screws.
- top up the brake fluid.
- unscrew the bleeder one at a time. Loosen the screw push the pedal down hold it down tighten the screw and then release the pedal.

Repeat this until you have a continues flow. I have done this but only the drivers side front wheel and rear passenger side is working the pedal is extremely spongy and the other two wheels will not bleed or pull fluid???

Your help would be greatly appreciated.