|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
|
|
Thread Tools | Display Modes |
27-03-2006, 06:56 PM
|
#1 | ||
|
Starter Motor
Join Date: Mar 2006
Location: Brissie
Posts: 6
|
gday
I have just installed an immobiliser into my EA and have run into some difficulty with the keyless entry. The immob provides 2 wires, one for lock and one for unlock. The instructions note that if the lock and unlock don't work just from having these wires attached to the relevant lock and unlock wire from the central locking, then 2 relays will be needed. Can anyone advise on how to wire up the relays? If you need more info, please ask Thanks |
||
|
|
central locking relay assistance
Threaded Mode