|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
18-11-2006, 05:00 PM
|
#1 | ||
|
Apprentice Fridgey
Join Date: Aug 2005
Location: In a lil place called Gladstone aka. Glad2bstoned
Posts: 114
|
Has anyone with an ef/el or higher removed the control valves in the intake plenum?? I have been told that if removed they increase flow but take away the torque down low? Supposed to be a good mod!
__________________
96 EF Falcon Futura, Powered by Microtech, 2222549 Crow Cam, Metal Gasket, Port and Polish, Oversized Forged Valves, EF Fairmont Dash, K&N Highflow Filter, Pacemaker Competition Extractors, 2 1/2 Mandrel Bent Exhaust, High Flow Cat, Converter Shop 3500 stall, Shift Kit, 4.11 Diff Ratio, Mini Spool Best ET 14.654 @ 88.270Mph at Benaraby Raceway, Gladstone Queensland |
||
|
|
|
18-11-2006, 08:22 PM
|
#2 | ||
|
OPT 20
Join Date: Mar 2006
Location: Country SA
Posts: 209
|
Very little (if any) to be gained up top and you will loose low end torque. With a modded engine you may gain something by changing the point at which the valve opens - you would need advice from those who have done and proven so though. The stock BBM system is actually quite good.
__________________
'94 EF GLI Dash Mat Color-coded Ashtray Polished Wheel Nuts |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Control Valves removed?
Linear Mode
