|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
17-12-2006, 08:31 AM
|
#1 | ||
|
Apprentice Fridgey
Join Date: Aug 2005
Location: In a lil place called Gladstone aka. Glad2bstoned
Posts: 114
|
I installed my 549 cam a few weeks back and i never knew a standard falcon could gain so much from a cam. From not being able to spin the wheels for more than 5 metres with it dieing it now will spin up to 30 odd metres before i have to back off to conserve my tyres. Still having some issues with the idle hunting because of the auto but it slowly gets better. Anyone looking to buy this cam i highly recomend it. I also used a high comp copper gasket which made it a little better.
__________________
96 EF Falcon Futura, Powered by Microtech, 2222549 Crow Cam, Metal Gasket, Port and Polish, Oversized Forged Valves, EF Fairmont Dash, K&N Highflow Filter, Pacemaker Competition Extractors, 2 1/2 Mandrel Bent Exhaust, High Flow Cat, Converter Shop 3500 stall, Shift Kit, 4.11 Diff Ratio, Mini Spool Best ET 14.654 @ 88.270Mph at Benaraby Raceway, Gladstone Queensland |
||
|
|
|
17-12-2006, 11:57 AM
|
#2 | ||
|
I build your wish list...
Join Date: Jan 2005
Location: Country Victoria
Posts: 4,484
|
is that a 2222549 Wade cam ?? did not know wade made that part number..
as Crow have a 2222549 cam?? and Yes the CROW 549 cam is very good I have been running it for about 4,000km now and still feels good. |
||
|
|
|
|
17-12-2006, 12:00 PM
|
#3 | ||
|
V8 Ute V8 Boat
Join Date: Aug 2005
Location: south australia
Posts: 1,804
|
i had that cam in mine before but it suits EF-EL cars more then the old EB's
__________________
VE SS Ute manual 09 AU XR8 UTE 200KW manual 02 Challanger Ski boat V8 01 125 Thumpster 2010 Swag All set for the weekend |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Crow Cam 2222549
Linear Mode
