|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
02-05-2011, 06:13 PM
|
#1 | ||
|
Starter Motor
Join Date: May 2011
Posts: 1
|
Hi All,
My son has put a new head on his '93 ED Falcon and after putting everything back together, had a problem putting the spark plug leads back in. Does anyone know which is plug number 1 on the distributor. I realise that you can put the piston at top dead centre and look under the cap, however the dizzy is very difficult to get to. So if anyone can tell us which one is 1, that would be a big help. thanks. DP |
||
|
|
|
03-05-2011, 02:42 AM
|
#2 | ||
|
I totalled my XR6
Join Date: Jan 2011
Location: Australia
Posts: 1,193
|
Without trying to sound like a meany-greeny; I'm gonna say he should've labelled them.
If nobody has replied to you by tomorrow morning/midday, I'll go out and look at my XR6 - I'm guessing it will all be the same as they're the same year/engine etc. I would go out now but it is freezing cold and wet.
__________________
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
ED Falcon number 1 on dizzy
Linear Mode
