![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Starter Motor
Join Date: Sep 2020
Posts: 1
|
Hello All,
am a new forum member here and have to be honest with you I have joined out of a need to try and find a part. My mate has just dragged a 1933 B Model out of its storage where it has been for approx 70 years he is going to restore it. The problem is the car was off the road to have some engine repairs that involved removal of the head which is now lost, so we are trying to procure a head for the car. The head does look very much like an A model, and an A model will fit, but the A model water pump protrudes too far forward causing trouble to get the fan to fit behind the rearwards sloping radiator. therefore to kep the car original without modification need to find an original head. Thanks in advanceBeech45 |
||
![]() |
![]() ![]() |
2 users like this post: |
![]() |
#3 | ||
FF.Com.Au Hardcore
Join Date: Nov 2013
Posts: 2,037
|
A B block with an A head would be kinda like a BA, and there's plenty of those around.
In all seriousness, good luck, can't imagine it's terribly common at all. |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#4 | ||
FF.Com.Au Hardcore
Join Date: Oct 2008
Location: Victoria
Posts: 7,854
|
Just a google because I was curious to help identify the B - head
http://www.fordgarage.com/pages/ABcy...comparison.htm says there was a Police version This place has them for $325 USD https://www.ecklers.com/catalogsearc...ylinder%20head
__________________
______________________________ 2015 Territory Titanium RWD Diesel - SOLD 2016 BMW X5 xdrive 30D Msport Seadoo Challenger 210SE 310HP |
||
![]() |
![]() ![]() |
4 users like this post: |
![]() |
#5 | ||
FF.Com.Au Hardcore
Join Date: Jun 2010
Location: Perth
Posts: 1,315
|
With that link from Bevsta, you shouldn't have any problems at all ordering the parts.
But, you will probably find that you need all the parts for a full overhaul of the engine, and oversize the pistons, grind the crank etc, while you are at it. If you don't, it will leak oil, smoke and knock, or barely start or move forward at all. Oh by the way, I would have slotted in the entire engine from a 2.3 EcoBoost :-) I'm sure you could dress that up with some of the old parts to look old, such as the air cleaner, fake carb and spark plugs with open wires etc. It would at least run a lot quicker that way Cheers, |
||
![]() |
![]() ![]() |
3 users like this post: |
![]() |
#6 | ||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,642
|
|
||
![]() |
![]() ![]() |
3 users like this post: |
![]() |
#7 | ||
FF.Com.Au Hardcore
Join Date: Oct 2008
Location: Victoria
Posts: 7,854
|
From wiki
Today, the 1932 Model B, although always a little bit in the shadow of the V8, is a highly collectible car and people will pay thousands of dollars to restore one to original specification, which is ironic, as they were once cheap "throwaway" cars popular with hot rodders who would tear them apart and use them as the basis for a "build", which is partly why it is so hard to find an unaltered specimen today.
__________________
______________________________ 2015 Territory Titanium RWD Diesel - SOLD 2016 BMW X5 xdrive 30D Msport Seadoo Challenger 210SE 310HP |
||
![]() |
![]() ![]() |
2 users like this post: |
![]() |
#8 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 21,967
|
Anything without AEB and 5+ airbags is a death trap! Kittens will die!
More seriously, hope it returns to life satisfactorily and gives much ownership pleasure - as opposed to asset growth onanistic preening. |
||
![]() |
![]() ![]() |
![]() |
#9 | ||
Regular Member
Join Date: Sep 2010
Location: melbourne
Posts: 220
|
Hi Beech, this is a very good ford forum, but it's mainly for modern stuff, 60's and up, a good forum to ask this is 'Ozrodders', hundreds of old knowledgeable guys who play with this era of fords all the time.
Moderators, don't hate me, just trying to give some good advice (i think). |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#10 | ||
FF.Com.Au Hardcore
Join Date: May 2006
Location: In my happy place
Posts: 5,432
|
As chilly said ozrodders is a good place to start and a guy buy the name of Colin Bates will be a guy who can really help
I’ve got a few different 4cyl and V8 flat Head heads here if you have a photo to ID it I may be able to help
__________________
Pariahs C.C. What could possibly go wrong I post images with postimg.cc (so I don’t forget) |
||
![]() |
![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|