![]() |
|
|
![]() |
#1 | ||
PS13 K'S
Join Date: Aug 2007
Posts: 257
|
Hi guys, did a little research on this but didnt really find what i was looking for so figured id ask here,
i have a 2000 Series 2 AU falcon ute factroy 5L v8 auto, engines getting a little tired, so i picked up a Sep 99 series 1.5 AU xr8 sedan thats manual, without doing as much research as i should have. now my question is snice the sedan has smart sheild, would i get away with swapping the manual Ecu BCM and ing into my series 2 and all be hunky dory or is it going to be a pain, one final question is tailshaft is the ute auto tail shaft the same length as manual? cheers |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
PS13 K'S
Join Date: Aug 2007
Posts: 257
|
conversion done, Tried it with the ECU,BCM, and colum out of the 1.5, no go, used the 1.5 engine ecu, series 2 bcm and collum with a pats relearn and all is sweet. utes up and running again. and the manual tailshaft was shorter
|
||
![]() |
![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|