|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
16-09-2005, 08:41 PM
|
#1 | ||
|
Regular Member
Join Date: Jan 2005
Location: Hazelbrook, Blue Mountains, NSW.
Posts: 289
|
Hey does the AU metal gasket require any sealant to be applied before fitting?
__________________
Proud Owner of 06' TTG |
||
|
|
|
16-09-2005, 08:51 PM
|
#2 | ||
|
chasing more power
Join Date: Mar 2005
Location: around
Posts: 129
|
no the gaskets are coated alredy...
bolt down and go. would leave coolant out for a week or so to allow gasket to adhere correctly.
__________________
9.93@140.8mph......more to come Thanks to Mikes Dynos ALLRACE & K.E.A.S.
|
||
|
|
|
|
16-09-2005, 09:19 PM
|
#3 | ||
|
Regular Member
Join Date: Jan 2005
Location: Hazelbrook, Blue Mountains, NSW.
Posts: 289
|
Thanks, so do you prepare the block any differently, like you stone it down but you still have a few of the factory machine marks, are they ok?
__________________
Proud Owner of 06' TTG |
||
|
|
|
|
16-09-2005, 09:53 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Melbourne
Posts: 1,382
|
dunno about the AU gaskets but normally I spray some Hylomar on the gasket and block surface.
|
||
|
|
|
|
16-09-2005, 10:17 PM
|
#5 | ||
|
Regular Member
Join Date: Jan 2005
Location: Hazelbrook, Blue Mountains, NSW.
Posts: 289
|
Ok, Ive done many headgaskets, do them at work all the time but we only ever use the standard gasket, never done an Au one so im new to the steel gasket, and they dont have any info on the pack like an aftermarket (like monotorque) one. But feeling pretty confident now, actually already fitted one two nights ago, but the head shop didnt find that there was a pin hole leak in cyl one! so i just thought id make double sure this time, no way is it coming off again! lol
thanks for the reply's. Brent
__________________
Proud Owner of 06' TTG |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
To those who have fitted AU Headgaskets.
Linear Mode
