|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
17-08-2006, 08:26 PM
|
#1 | ||
|
Regular Member
Join Date: Nov 2005
Posts: 58
|
I am in a world of *****! i was in the process of changing the plugs on my EB falcon 6 when i tried to take out number 5 i wouldn't budge, so i got a long bar and put pressure on it and it snapped off flush with the head! To make matters worse, i tried a screw extractor to remove the plug thread and now that has snapped off in the head! Any Ideas? I think i might have to remove the head and take it out for the inside!
that is the last time that i try to save money by servicing the car myself! |
||
|
|
|
17-08-2006, 08:50 PM
|
#2 | ||
|
Regular Member
Join Date: Dec 2005
Posts: 158
|
The screw extractors are made of a very hard steel so you will have bucklys chance of getting it out yourself. Call around a few engine builders and explain the situation. They should be able to get it out and put in a helicoil for you for $40-60. To do properly with the head still on the block you would need a jig to hold everything at the right angles, etc.
Use the phone and call around. |
||
|
|
|
|
17-08-2006, 09:04 PM
|
#3 | ||
|
Regular Member
Join Date: Apr 2006
Location: S E Melbourne
Posts: 221
|
call the Thread Doctor he might be able to do it
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Help me!!!!!!
Linear Mode
