|
23-05-2012, 08:16 AM | #1 | ||
Starter Motor
Join Date: Feb 2012
Posts: 2
|
Hi guys, I washed down engine bay with lp, had car running, blew down after with air, drove it out turned off and started it again. Few hours later it won't start, I have replaced coil , taken off diZzy cap clean out mostiure, and still won't start no spark, I have power into coil and ohms out, any ideas what to try please??
|
||
23-05-2012, 06:54 PM | #2 | ||
Where to next??
Join Date: Oct 2006
Location: Sydney
Posts: 8,893
|
They hate getting the engine wet....
Ummmm... does it turn over? Mine would run rough after an engine wash, or even going through a deep puddle but whatever moisture was there would soon burn off on its own. Never needed to take anything apart or clean specific components. Could you have replaced something the wrong way when drying it out?
__________________
___________________________ I've been around the world a couple of times or maybe more....... |
||
23-05-2012, 11:39 PM | #3 | ||
Starter Motor
Join Date: Feb 2012
Posts: 2
|
Yeah After a day of siting it now cranks and has spark but still won't start , I have since blown every plug I could find again and replaced leads, plugs and dizzy cap, still won't start, I'm at a loss any idea is a good idea atm
|
||