|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
04-07-2012, 08:42 AM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2007
Location: George town, tasmania
Posts: 800
|
Just wondering whether painting fiberglass is the same process as plastic?
Do you still use plastic primer? Or is there a special type of primer for fiberglass? Cheers
__________________
Rapid "04" ba2 xr8 t56 sedan PERFORMANCE MODS CAI + pod filter. That's all for the moment. More to come soon VISUAL MODS 18in wheels wrapped in pirelli pzero nero. Push button start. Black XR8 badges, black 260 bonnet stripes, black 260 spoiler stickers, blackened sections on my tail lights, tinted side indicators, blue interior LEDs, HID head Lights, LED angel eyes and a BF typhoon front bar in the shed waiting to get painted. |
||
|
|
|
04-07-2012, 09:03 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2010
Location: Sun City, North Australis
Posts: 4,274
|
Not an expert, but i painted my spoiler kit with just normal 2pac paints and primers. The gel coat was in good condition and smooth. Just sanded it back a little and 2yrs later paint still holding on well.
__________________
You've seen it, you've heard it and your still asking questions?? Don't write off the Goose until you see the box going into the hole.... |
||
|
|
|
|
04-07-2012, 09:48 AM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2008
Posts: 2,312
|
easy to google,
painting fiberglass, About 13,600,000 results This one recommends epoxy based paints http://liambean.hubpages.com/hub/How...int-Fiberglass
__________________
My ride: 2007 Falcon Ute BF XR8 Orange, MTO. |
||
|
|
|
|
04-07-2012, 12:17 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2007
Location: Brighton, Adelaide
Posts: 3,972
|
as posted above,
i normally just scuff back the gelcoat, with green scotchbrite or even 320 freecut paper, just to degloss the surface, give the etch something to stick to. give it a quick wipe over with metho and a paper towel then a couple of light coats of etch primer, then a few coats of 2 pack primer, let it cure, block it back flat then paint (leaving time for primer/paint to cure between coats etc) same as painting steel etc.
__________________
Money Talks, but all i ever hear is it saying Goodbye!! |
||
|
|
|
painting a fiberglass bumper?
Linear Mode
