Club trailer - Page 6

pHaT`eL · 19-08-2006, 04:51 PM

zipper as in what the BAR F1 cars had.. a big zip down the middle to seperate the ea/eb and ef/el sides..

LUXO_8 · 19-08-2006, 04:55 PM

Quote:

Originally Posted by pEtE`

zipper as in what the BAR F1 cars had.. a big zip down the middle to seperate the ea/eb and ef/el sides..

that would be so much panelwork its not funny....

the bar cars just had the paintwork done in the zipper fassion......

good idea in theory... lol

efgiar · 20-08-2006, 02:36 PM

well, the car has been at my neighbours house for a week now still waiting on the house inspection (we are renting here) the lady next door went away and her son has moved in to house sit untill tuesday, well they had a party friday night and to my horror one of the little bastards had kicked a dint in one of the doors on the car!!! i jumped the fence and had a good look today and the door is knackered, not worth trying to repair (they are usually never worth it) i went over there and spoke to him and basicly said that i dont care who did and i dont care who fixes it but as long as it gets replaced with a straight door then ill be happy. ill get some pics wen i get the trailer back and show you guys. :(

pHaT`eL · 22-08-2006, 12:15 AM

Quote:

Originally Posted by MADNC_8

that would be so much panelwork its not funny....

the bar cars just had the paintwork done in the zipper fassion......

good idea in theory... lol

I didnt mean half an ea and half an eb, i meant just the tail lights and boot garnish, and maybe 2 different paint colours, same with the ef and el, just tail lights and boot garnishes, etc..

Aaron_EF8 · 22-08-2006, 10:41 AM

I still don't quite understand what you mean, but nearly every time a car is painted in 2 colours it looks like it's been in a crash and repaired with panels from other cars.

pHaT`eL · 23-08-2006, 12:05 AM

split the car/trailer down the middle.. from one side it would be say a green eb, and from the other it would be a silver ea with the appropriate factory alloys.

mcflux · 23-08-2006, 12:46 AM

hmm, I see where you're getting at. Sorting out the garnish would be the only issue I can think of.

And it begs the question: why?

efgiar · 23-08-2006, 05:44 PM

effort and time wasted i think, good idea but not for a theme for the trailer.

pHaT`eL · 24-08-2006, 01:19 AM

well weve got more than ea's in the club, was just an idea, but yeh, guess no one else sees my enthusiasm, lol..

EFFalcon · 24-08-2006, 01:21 AM

the idea has merit

just very hard to pull it off and have it look good.
i think a clean simple idea works best.

efgiar · 24-08-2006, 06:04 PM

yeah, ill be definantly changing the tail lights to ed fairmont/ghia ones as they look tops and ill find a better looking ea garnish as trailers do not require reversing lights. i will get some pics of the door on the weekend and will have to speak to the neighbour again.

LUXO_8 · 24-08-2006, 06:08 PM

just chuck the Ghia garnish on without the reverse globes in it.........dont want to make it not look like a falcon garnish if you know what i mean....

efgiar · 26-08-2006, 09:42 AM

yeah i do but if ed fairmont lights = horn then im sure just a simple clean nice falson garnish would be a bit better then having unused lights there, and knowing that they are there will peess me off

well cross that bridge when we get there i havnt forgotten about photos either will get them today

Dezza · 26-08-2006, 12:19 PM

Quote:

Originally Posted by efgiar

yeah i do but if ed fairmont lights = horn then im sure just a simple clean nice falson garnish would be a bit better then having unused lights there, and knowing that they are there will peess me off

well cross that bridge when we get there i havnt forgotten about photos either will get them today

So what you're saying is that you'll combine ED lights with an EA garnish? It won't look that great as the EA has a ridge along the top of the lights and garnish. On the EB/ED, the lights and garnish were completely flat. That would cause the garnish to sit out a bit further than the lights.

efgiar · 27-08-2006, 12:23 AM

hmm... interesting. might have to look into that and make a custom one then :P when we get there well figure it out

Kaddis · 28-08-2006, 11:59 AM

i have a spare set of EB tail lights & garnish (GLi) that can be used if you want

niko · 28-08-2006, 12:55 PM

Quote:

Originally Posted by ea_silver_ghia

So what you're saying is that you'll combine ED lights with an EA garnish? It won't look that great as the EA has a ridge along the top of the lights and garnish. On the EB/ED, the lights and garnish were completely flat. That would cause the garnish to sit out a bit further than the lights.

ive done it before, didn't look to bad, the lights sat out further than the garnish

Dezza · 28-08-2006, 02:26 PM

Quote:

Originally Posted by niko

ive done it before, didn't look to bad, the lights sat out further than the garnish

My bad. Actually I mustn't have been thinking when I wrote that. The EA garnish would sit in because it curves inwards until it hits that lip at the top.

Rmyers · 10-10-2006, 05:45 PM

So has there been any progress made on this???

efgiar · 10-10-2006, 05:48 PM

not yet :( still trying to get some money in to buy a welder... cant go much further without one, need a recod alt or starter? lol :P

Jason[98.EL] · 10-10-2006, 08:28 PM

contact me josh i can help with it if you want

jason

[Tonko] · 11-10-2006, 12:11 AM

i cant believe i just seen this!!!
if you need anything, i have a still registered EA fairmont about to go to the crusher, and have a set of tinted EA tail lights if you want them...

efgiar · 16-10-2006, 08:06 AM

[Tonko] · 16-10-2006, 03:25 PM

looks like someones been having fun,
do you have enough bottles of oil in that first pic?

kyro_02 · 16-10-2006, 04:17 PM

i hear i'm picking up a ea door on my way back is that right?? when i come back from qld ayy

efgiar · 16-10-2006, 05:05 PM

yes u are nathan, from tonko.

tonko, yes we (myself, kyro, supahstah, lexgreen) do a big tip run every so often full of crap and having 4 cars that are used every day, plus a 5th (trying to sell it) the oil containers build up :P

[Tonko] · 07-11-2006, 07:36 PM

Bad news about that car, tree branch fell on it and the roof, doors, bonnet etc are buggered, i'll keep an eye out though

kyro_02 · 07-11-2006, 09:53 PM

yeah i got back from qld about a week ago.. i totally forgot to pickup sorry! :(

bArNsY · 12-12-2006, 10:46 AM

How is it all going?
If you need any parts from a NA fairlane let me know and I will be happy to donate them

efgiar · 12-12-2006, 11:07 AM

yeah ill be taking it to geelong over the christmas break hopfully to jasons work and we will work on if for a couple of days and hopfully get it done. we need a few bits and pieces, door trims, seats, carpet etc but all should be readily available. thanks for the offer barnsy me or jason will let you know