|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
19-06-2010, 10:02 AM
|
#1 | ||
|
Starter Motor
Join Date: Jun 2010
Posts: 2
|
Has anyone had any joy with sleeving a 2L pinto block and getting it to work reliably in a race engine? Any thoughts or advice much appreciated.
Last edited by steveb0146; 19-06-2010 at 10:12 AM. |
||
|
|
|
30-06-2010, 09:32 PM
|
#2 | ||
|
Regular Member
Join Date: Apr 2007
Location: Brisbane
Posts: 272
|
I haven't sleeved a pinto, but i've sleeved other blocks with no dramas. As long as the work is carried out by a competent machine shop you will be fine. What is the purpose of the sleeve: repair, reduce overbore size, or go a much bigger bore?
__________________
When the flag drops... The bullsh!t stops... |
||
|
|
|
Sleeving Pinto Blocks
Linear Mode
