|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
21-06-2013, 07:56 PM
|
#1 | ||
|
Tippy-tronic Free Zone
Join Date: Dec 2008
Posts: 897
|
Today I discovered some crazing in the piano black console trim, just behind the cup holder. Definitiely coming from underneath the face surface i.e. not scratches.
Has anyone else encountered this problem ? |
||
|
|
|
22-06-2013, 12:38 AM
|
#2 | ||
|
Regular Member
Join Date: Jan 2010
Location: Melbourne
Posts: 490
|
I'm not familiar with the term crazing. Can you elaborate a bit more?
|
||
|
|
|
|
23-06-2013, 12:09 PM
|
#3 | ||
|
Tippy-tronic Free Zone
Join Date: Dec 2008
Posts: 897
|
Well, it looks like a scratch mark, but it is a raised surface with the outer skin still intact and clearly coming from the inside of the trim piece.
Picture a squiggly line, raised surface but still shiny all over. Definitely substrate problem. Around 30-40mm in length, just between the rear cup holder and the console box. We have been running the heated seats more frequently recently (-5C !!) and it wasn't there a couple of weeks ago when I cleaned the interior. Another warranty item to resolve...... And the centre console is squeaking quite a lot now - "itchy plastic" - loose at front of piano black gearstick surround. |
||
|
|
|
|
24-06-2013, 01:32 AM
|
#4 | ||
|
Regular Member
Join Date: Feb 2012
Location: Sydney
Posts: 34
|
Can't help with the crazing plastic.
For the itchy plastic, best to remove the surround and pack it with stick-on foam, so that it is a nice tight fit.
__________________
2011 Mondeo Titanium Hatch, TDCI |
||
|
|
|
XR5 MB - Trim Crazing
Linear Mode
