Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Fiesta, Festiva and Ka

Reply
 
Thread Tools Display Modes
Old 21-07-2005, 06:34 PM   #1
mitch_lx
Candy White GTI
 
mitch_lx's Avatar
 
Join Date: Jan 2005
Posts: 1,516
Default Advice on tyres

Hey everyone, just wanting to know what tyre pressures you guys use, preferably a pressure thats best for preserving tyre life.
I have the stocky 15 inch wheels with bridgestone turanza 195/50/15
any advice would be great.

__________________
Volkswagen GTI Polo.
Candy White, Anthracite heated Sports leather seats w/ Red stitching.Tinted Windows, Eibach Pro-Kit springs,Whiteline Front/Rear adjustable sway bars,Cupra R intake, Forge Turbo Inlet pipe,BMC panel filter, APR stage one flash,
Dunlop SP sport MAXX, Forge Polished upper front strut brace. 3'' downpipe and highflow cat


Loads of fun :
mitch_lx is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2005, 06:39 PM   #2
Pieoter
FF.Com.Au Hardcore
 
Join Date: Jan 2005
Posts: 792
Default

37 Front
35 Back
__________________
COLORADO RED FIESTA ZETEC
MODS - Window Tint, Bmc Panel Filter, Euro Plates, Ghia grill, Momo F16 leather gearknob, Momo Leather gearboot, WQ Zetec Front sway bar, WQ Zetec Sway bar links, WQ Zetec bushes.
ICE - Alpine CDA9827, MbQuart Reference 6.5inch splits, MbQuart Reference rears, Rockford Fosgate Punch Stage 3 12inch Sub, Rockford Fosgate P4004 + P3001.
Pieoter is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2005, 07:17 PM   #3
GROOV3
Rollin
 
GROOV3's Avatar
 
Join Date: Mar 2005
Location: Adelaide, SA
Posts: 214
Default

i have 205/40/16 tyres

36psi all around
GROOV3 is offline   Reply With Quote Multi-Quote with this Post
Old 23-07-2005, 05:05 AM   #4
Tripe
Guest
 
Posts: n/a
Default

29psi up front and 25 psi at rear. I have the standard tyres also. Makes for a smoother ride and less rattles. Also, if I have the tyre pressures set at 36psi all round (which is what Ford keeps inflating them to) the car skips over bumps and almost bounces off the road when going over train tracks at 60kph! I don't care about wear or economy. I just like a smooth ride so that my dog doesn't fall off the roof! lol
  Reply With Quote Multi-Quote with this Post
Old 23-07-2005, 12:38 PM   #5
mitch_lx
Candy White GTI
 
mitch_lx's Avatar
 
Join Date: Jan 2005
Posts: 1,516
Default

LOL @ the poor dog..thanks for your advice guys i inflated them to 31 psi the other day. seem okay i guess!! i have to do a tyre rotation this weekend, keep that tyre life going.
__________________
Volkswagen GTI Polo.
Candy White, Anthracite heated Sports leather seats w/ Red stitching.Tinted Windows, Eibach Pro-Kit springs,Whiteline Front/Rear adjustable sway bars,Cupra R intake, Forge Turbo Inlet pipe,BMC panel filter, APR stage one flash,
Dunlop SP sport MAXX, Forge Polished upper front strut brace. 3'' downpipe and highflow cat


Loads of fun :
mitch_lx is offline   Reply With Quote Multi-Quote with this Post
Old 28-05-2006, 10:30 PM   #6
Ives
FF.Com.Au Hardcore
 
Ives's Avatar
 
Join Date: May 2006
Location: Sydney, NSW
Posts: 2,368
Default

Quote:
Originally Posted by mitch_lx
Hey everyone, just wanting to know what tyre pressures you guys use, preferably a pressure thats best for preserving tyre life.
I have the stocky 15 inch wheels with bridgestone turanza 195/50/15
any advice would be great.
Mitch, that's a good question. I also want to know... we need more people's tyre pressures.

I just adjusted mine to 30psi all around. It was like 36-37psi before (from the dealer).
What would be a good tyre pressures for "normal driving"? The tyre placard inside the glove box said something like 29psi in front and 28psi on rear (for 195/50 R15).
Ives is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2006, 08:06 AM   #7
Scareybear
GRRRR.....
 
Scareybear's Avatar
 
Join Date: May 2005
Location: Brisbane
Posts: 1,158
Default

Quote:
Originally Posted by HyperKid
Mitch, that's a good question. I also want to know... we need more people's tyre pressures.

I just adjusted mine to 30psi all around. It was like 36-37psi before (from the dealer).
What would be a good tyre pressures for "normal driving"? The tyre placard inside the glove box said something like 29psi in front and 28psi on rear (for 195/50 R15).
I'm running 40psi in my 17's, and was running 38psi in the 15's.
I think if you really enjoy the handling, you should always run a higher pressure than the placard states, otherwise you'll wear the outer shoulders a lot quicker.
Oh and if you do drive hard get your wheel alignment checked every 5,000kms
__________________
Now - 2007Renault Megane sedan, Steel Gray, 19" Koya Ambush with 235/35R19 Yokohama ADVAN V103, Eibach Pro-Kit.
Gone but not forgotton - Diamond White 2004 LX Fiesta



If you sneeze with your eyes open, do your eyes pop out??
Scareybear is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2006, 08:08 PM   #8
murcod
FF.Com.Au Hardcore
 
Join Date: Jan 2005
Location: Adelaide
Posts: 1,692
Default

For most cars I've owned, I've found around 3PSI higher than the factory placard is a good compromise between ride and handling. Manufacturers always recommend low pressures as the ride will be more comfy!

You need to be very careful with the low profile tyres too, as running them too low could result in rim damage.
__________________
2016 Kuga Titanium 2.0l EcoBoost
murcod is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2006, 08:16 PM   #9
Ives
FF.Com.Au Hardcore
 
Ives's Avatar
 
Join Date: May 2006
Location: Sydney, NSW
Posts: 2,368
Default

Quote:
Originally Posted by Scareybear
I'm running 40psi in my 17's, and was running 38psi in the 15's.
I think if you really enjoy the handling, you should always run a higher pressure than the placard states, otherwise you'll wear the outer shoulders a lot quicker.
Oh and if you do drive hard get your wheel alignment checked every 5,000kms


Quote:
Originally Posted by mondeost24
For most cars I've owned, I've found around 3PSI higher than the factory placard is a good compromise between ride and handling. Manufacturers always recommend low pressures as the ride will be more comfy!

You need to be very careful with the low profile tyres too, as running them too low could result in rim damage.

I see, thanks for the info, people
Ives is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2006, 08:45 PM   #10
Ives
FF.Com.Au Hardcore
 
Ives's Avatar
 
Join Date: May 2006
Location: Sydney, NSW
Posts: 2,368
Default

What size and brand of tyres do you all use? Also how much did they cost you?
Ives is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2006, 09:54 PM   #11
Pieoter
FF.Com.Au Hardcore
 
Join Date: Jan 2005
Posts: 792
Default

Im running the standard 15's with Potenza GIII's on the front and Turanza on the back. They give excellent traction but the ride is pretty harsh as I run 36psi (cold).

They cost me less than $300 to get fitted with a wheel alignment and balance.
__________________
COLORADO RED FIESTA ZETEC
MODS - Window Tint, Bmc Panel Filter, Euro Plates, Ghia grill, Momo F16 leather gearknob, Momo Leather gearboot, WQ Zetec Front sway bar, WQ Zetec Sway bar links, WQ Zetec bushes.
ICE - Alpine CDA9827, MbQuart Reference 6.5inch splits, MbQuart Reference rears, Rockford Fosgate Punch Stage 3 12inch Sub, Rockford Fosgate P4004 + P3001.
Pieoter is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2006, 11:10 PM   #12
RichieMK6
Panther Black MK6
 
RichieMK6's Avatar
 
Join Date: Mar 2005
Location: Central coast
Posts: 283
Default

PROXES R888



I would love to try these in hard compound , one problem there $246 a pop, my driving stlye = not last long
RichieMK6 is offline   Reply With Quote Multi-Quote with this Post
Old 30-05-2006, 05:11 PM   #13
murcod
FF.Com.Au Hardcore
 
Join Date: Jan 2005
Location: Adelaide
Posts: 1,692
Default

They could be interesting in the wet!!
__________________
2016 Kuga Titanium 2.0l EcoBoost
murcod is offline   Reply With Quote Multi-Quote with this Post
Old 30-05-2006, 05:15 PM   #14
Professor Farnsworth
Fossil fuel consumer
 
Join Date: Jul 2005
Location: Mod For: Pub, Bar, Sales Yard, Show 'N Shine, Photoshop, AU to BF, FG to FGX, Territory & Sports Bar
Posts: 17,027
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Many years of valuable contributions to the forum, including some superb build threads. 
Default

i haven't checked the pressures in my fiance's zetec, but i can tell you the ride is hard as hell, and i feel it all after having back problems recently. Might drain a little out, but not enough to make it wear unevenly on the outer edges.
Professor Farnsworth is offline   Reply With Quote Multi-Quote with this Post
Old 30-05-2006, 10:49 PM   #15
Fled74
The Thread Killa
 
Fled74's Avatar
 
Join Date: May 2006
Location: Melbourne
Posts: 1,064
Default

I'm running TOYO 205/45/16 Trampio tyres all round at 34psi in front and 32 at the rear. Problem is, I have to keep re-inflating them every five days because the pressure keeps dropping by 3-4psi, resulting in a very hard ride. I dunno if it's the bumpy roads or a problem with the valve stems. I should have 'em checked.
Fled74 is offline   Reply With Quote Multi-Quote with this Post
Old 30-05-2006, 11:23 PM   #16
xurbanx
FF.Com.Au Hardcore
 
xurbanx's Avatar
 
Join Date: Jul 2005
Location: Victoria
Posts: 1,007
Default

No idea on mine, they're the stock Turanza's (:
xurbanx is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 03:55 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL