|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
30-08-2010, 01:37 PM
|
#1 | ||
|
Starter Motor
Join Date: Sep 2008
Posts: 27
|
hi,
i was hoping someone would be able to help me witht the fire sequence for my 2lt ford escort. |
||
|
|
|
30-08-2010, 03:08 PM
|
#2 | ||
|
Regular Member
Join Date: Feb 2007
Posts: 82
|
1-3-4-2
|
||
|
|
|
|
30-08-2010, 03:10 PM
|
#3 | ||
|
Rally Nut
Join Date: Feb 2009
Location: Melbourne
Posts: 297
|
1,3,4,2
too slow at typing - lol heres a good pic to help out Pinched (borrowed) from RS Motorsport 
Last edited by Puzzlescort; 30-08-2010 at 03:16 PM. |
||
|
|
|
|
31-08-2010, 01:37 PM
|
#4 | ||
|
Starter Motor
Join Date: Sep 2008
Posts: 27
|
thanks to both of you.
however i still have a problem, it wont start! i have plenty of spark, plenty of fuel going in, will the gap in the points make a BIG difference? i did the gap by sight as i dont have a feeler gauge. it turns over very easy, just doesnt kick into life.... any suggestions |
||
|
|
|
|
31-08-2010, 04:27 PM
|
#5 | ||
|
Regular Member
Join Date: Feb 2007
Posts: 82
|
Points gap will make a difference if it's way out. Best bet is to just nip into Stupa Sheep or Repco & buy a feeler gauge, they're probably only about $10- $15 for a cheap one that will do the job well enough.
If it's not starting, double check your connections from Dizzy-to-Coil, Dizzy-to-plugs. Besides that, it could be a lot of things. |
||
|
|
|
|
31-08-2010, 05:21 PM
|
#6 | ||
|
Starter Motor
Join Date: Sep 2008
Posts: 27
|
thanks heaps, will give it a go tonight....
|
||
|
|
|
|
04-09-2010, 10:31 AM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2009
Posts: 1,600
|
petrol............... match..............run...........call insurance
|
||
|
|
|
|
10-09-2010, 03:41 PM
|
#8 | ||
|
Regular Member
Join Date: Apr 2009
Location: Wangaratta Victoria
Posts: 46
|
timeing could be out 180 deg.remove disy turn engine over to tdc replace disy. dennis
|
||
|
|
|
|
10-09-2010, 04:47 PM
|
#9 | ||
|
Starter Motor
Join Date: Sep 2008
Posts: 27
|
thanks mate, ill try it and let you know how i go over the weekend.
|
||
|
|
|
|
12-09-2010, 12:22 AM
|
#10 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2009
Posts: 1,600
|
easy way to find tdc compression stroke. Pull no 1 plug, jam dunny paper in and bump the engine on the starter til the paper pops out, U now have tdc comp stroke. Toss the dissy back in and align the next firing plug lead according to the cap onto no 1. The fact that u have spark means ur points gap is close at least, and I dont really see u being 180 out if the engine turns freely, but ya never know i guess. Apologies for the fuel , match run joke...... thought u had it sorted out.
Cheers Doc |
||
|
|
|
fire sequence for 2lt escort
Linear Mode
