![]() |
|
|
The Pub For General Automotive Related Talk |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
FF.Com.Au Hardcore
Join Date: Dec 2008
Posts: 1,566
|
Hi everyone, some of you from the Au section may know im having a 3.9 LSD put in.
First of all I saw a diff advertised here on AFF for a ute 3.45 LSD. It was priced reasonably so I rang my mechanic and asked him how much hassle it was to fit a ute diff to a sedan because ive heard it was a straight swap. He told me it needed to be shimmed to fit and that it was no problem. I got a quote for fitting the gears, shimming the centre and swapping the centre into my car for $880 including diff oil which i thought was a very good price (I deal with them a lot) so I investigated the option of getting a reco'ed diff just to be sure. I was quoted $1540 for a fully reconditioned diff with quality used gears of my choice in ratio, they confirmed 3.9 was no problem (from a diff place in Geelong) who work with a local performance shop in Werribee who would fit it for $275 so to make a nice round figure we will say all up itll cost $1800. I paid $300 for my diff and $300 for my diff gears, add to $880 and we get $1480. That is $300 odd cheaper than getting a reco'ed diff so I went through my regular mechanic. Soon enough, I deliver the mechanic my ute diff and a week later my diff gears. I told him if i could get it in within 2 weeks thatd be great. This was roughly around the start of November. He said yep no problem, ill let you know when were ready to put it in. I get a call saying "oh by the way, you will need new wheel bearings, thatll be $275, we can reuse the old ones but they may damage and be noisy" so i said go ahead. This is now $1155. Now i dont mind someone having a slip up, but this means the $300 i was saving is now nothing. This is not the first time theyve underquoted, gotten the job, then decided to charge me for other necessary things they neglected to mention when i was first quoted. So i just bit the bullet and thought ok now were even, thats ok. Now we go through November, no call. I ring up every 2-3 weeks and they say yehh we are so busy, trying to fit it in. beyond the joke. i told him i wanted it in before christmas and he kept saying next week, next week. so they didnt even start it until last week! Last week i get a call saying that part of the diff was bottoming out and needed remachining so it would have to be sent to the diff place. He said to me "you can leave it as it is and it may start single spinning in 6-12 months or get it remachined, itll cost you $250" so i said, $250 is cheap insurance i dont want to pull it out in 6 months time i asked him what the final quote would be now and he told me $1380 would cover everything, ready to drive away. i asked if the whole thing was damaged and he told me the lsd was in good condition, just the one bit needed remachining. then i asked him if it was going to go straight in now cuz its a ute diff. Now i reminded him nearly everytime i phoned up to see if it was ready that it was a ute diff, i asked him about it before i bought it and we spoke of it numerous times. HE FORGOT. his own fault for leaving the bloody thing there for 3 months and putting other jobs he obviously deemed more important first. i said to him well ive told you so many times, its not coming out of my pocket. he reassured me that he wouldnt charge me and he would deal with it. he said so they dont have to take the entire thing apart again, we can simply swap the housing from my current diff with the ute diff and it will fit perfect. i said sure, go for it, if it works and its easiest for you (i felt bad that the had to put in more work but it is their own fault) when i dropped the car off i asked what it would cost for me to have the ute diff housing put onto my single spinning 3.23 because it was in good nick and id like to sell it. i also asked if i could grab the 3.45 gears from the ute diff too. they told me itd be about 100 bucks to put the housing on the centre so i could sell it. i said well i will only get about 200 for it so i guess we can do it, they said no problem today i get ready to pick up the car, i get a call saying the car is done, oh and by the way the bill comes to $2070 WTF?? now they are trying to tell me $1380 was just for the diff centre... PLUS fitting, PLUS they decided to charge me... wait for it... $300 to put my old centre in the ute housing for me to sell. wtf? they quoted me $100, why would i agree to spend $300 on a pretty useless diff when i would realistically probably get $150 for it?? why on earth would i agree to that? now i am arguing with them about the pricing, what am i supposed to do? ive been there 5-6 times for various things and they have never given me a written quotation. i confirmed the end price because i wanted to make sure i had the cash to pick up the car of course, no issues there then they decide to tell me that the diff was completely stuffed and the whole thing had to be reconditioned. not only was this contrary to what i was told only last week but they went ahead and spent a crapload more on something i didnt and had i known would NOT have approved. I DONT HAVE A LIMITLESS BUDGET. my dad reckons theyre trying to get back the money they spent stuffing around with the ute diff. so now i am up for a total of $2600 as opposed to what i could have gotten for $1800 in the first place. i understand things go wrong sometimes and i need to be charged more and i am fine if they ring up and explain why and ask before they go ahead and spend $1000 now i cant afford to pick up my car, they are disputing my every word, this has become ridiculously expensive and with the story changing every 5 minutes i have a feeling i am being ripped off, whether the extra work was needed or not i cant be sure anymore what do i do??? im stressing really badly, am i in the wrong somewhere here, have i missed something? they are treating me like an idiot! what rights do i have in this situation without a written quotation?
__________________
Current Blueprint 03 xr8 ![]() 5 speed manual, Difilippo Quad Big Boy system, BPR CAI, BPR Custom tune, Underdrives 256rwkw ![]() ![]() BA manual Typhoon Fully optioned, 340rwkw@16psi (thanks Bluepower)! The old ride.... AU Fairmont, cammed beast, R.I.P you made my p plate years bearable! 150.8rwkw courtesy BPR |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: Dec 2008
Posts: 1,566
|
sorry about the long post, i figure post all the details to make things easier to understand
__________________
Current Blueprint 03 xr8 ![]() 5 speed manual, Difilippo Quad Big Boy system, BPR CAI, BPR Custom tune, Underdrives 256rwkw ![]() ![]() BA manual Typhoon Fully optioned, 340rwkw@16psi (thanks Bluepower)! The old ride.... AU Fairmont, cammed beast, R.I.P you made my p plate years bearable! 150.8rwkw courtesy BPR |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Donating Member
![]() Join Date: Jun 2007
Location: Checking out soft furnishings....
Posts: 8,698
|
mate that sucks and i feel for you, but unless you have it in writting there is nothing you can do about it. no doubt they are taking you for a ride though
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Regular Member
Join Date: May 2008
Posts: 91
|
In my line of business if a customer has a complaint they cant deal with personally, as its getting nowhere, they can call the ombudsman, and my association. Then the ombudman and my association, question me on the matter. Getting a formal complaint is not good for the business.
Just document everything you spoke about in person, and on the phone. Put it in date order. When you dropped off the car, what you paid for parts, etc. Get anyone who was with you or who knows the story to witness your statement is true. Get your phone statement to verify the amount of times you called them.They will then negotiate for you, and you make it clear you only have $1*** dollars you can pay and no more. It can be very effective, and the one time in 17years it happened to me (and seriously the person was a nutcase), to make the problem go away, I refunded the entire amount, and let them keep the goods. |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
FF.Com.Au Hardcore
Join Date: Oct 2005
Posts: 3,412
|
There isn't much you can do really without a written quote.
It is his word against yours. You could go to Dept Fair Trading but it could be ages before he was prepared to let the car go. Try and come to a compromise with him somewhere in the middle, get your car and never go back to him. Just remember,there are plenty of douche bags like him around and that is why when you need some work done you do it through a forum sponsor as they WILL look after you |
||
![]() |
![]() ![]() |
![]() |
#6 | ||
CANT !!!!!!!!
Join Date: Jan 2009
Posts: 289
|
Name and Shame !
Dont let another forum member get screwed over......... Got to feel sorry for you mate, remember that your not alone, plenty of us have been burnt before. i use my mobile phone to record conversations these days, that way i can referance everything, "word for word".
__________________
-BA XR8 Ute- Better to be late, than VERY LATE !!!! ![]() YEAH HA !!!!!!!! ![]() |
||
![]() |
![]() ![]() |
![]() |
#7 | ||
FF.Com.Au Hardcore
Join Date: Oct 2006
Posts: 1,819
|
did you sign a service authorisation form or job card of some sort? if not you can jump in the car and driveaway, because legally you didnt authorise ny repairs and f it gets taken to court or small claims etc you will win.
|
||
![]() |
![]() ![]() |
![]() |
#8 | ||
.
Join Date: Mar 2006
Location: Brisbane
Posts: 6,197
|
I feel for you, mechanics seem to be the one trade that a quote means absolutely stuff all. They simply do not care that they gave you a firm quote, they simply don't care that they shonk you with GST and they simply don't care that if you knew how much they were going to "over charge" you, you would have just done the work yourself.
I've been bitten over and again by shops doing this sort of crap, it just seems accepted that mechanics can get away with what the rest of the trade world would get crucified for. Sometimes, the additional costs are well justified - but give me the chance to decide whether or not you'll do them. The shame is that there is really only 3 things to do: 1. Smack him in the mouth and take your car - deal with whatever comes of it; 2. Call the cops and tell them he is holding your car; 3. Pay him and stew on it - add the extra to the car when you sell it; There seems to be no point calling Fair Trading unless you have forever to sit around and hope. Good luck, I'm starting to lean toward number one more and more though. disclaimer - don't care how many mechanics jump up and down and tell me I'm "generalising" because this is my experience. A good experience is hard to find. |
||
![]() |
![]() ![]() |
![]() |
#9 | ||
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 632
|
Put it down to experience and move on, better to have this sort of problem with a diff and $800 than an engine or a car for thousands. Hopefully from this you'll find a quality workshop to deal with in the future.
|
||
![]() |
![]() ![]() |
![]() |
#10 | ||
Now Fordless
Join Date: Aug 2005
Location: Fremantle, WA
Posts: 3,611
|
You dont have to pay for the recon diff as you didnt authorise it. They're not allowed to do that.
And im surprised they didnt tell you about the bearings in the first place. Would be obvious if they do diffs all the time. |
||
![]() |
![]() ![]() |
![]() |
#11 | ||
Join Date: Dec 2004
Posts: 9,292
|
ask for a written bill detailing every item that your paying for.
Then you can start disputing each and every charge. |
||
![]() |
![]() ![]() |
![]() |
#12 | ||
FF.Com.Au Hardcore
Join Date: Dec 2008
Posts: 1,566
|
Thanks for the responses guys I'm meeting them on Wednesday with my dad after the long weekend so I'm not going to name and shame until I get a chance in case we can sort something out. I might call the dept of fair trading to find out exactly what my rights are so I can wave it in front of them when I see them.
I'm really angry because if I was informed the diff needed $1300 of work done to it I would have paid for their time taking it apart and walked away and bought a recoed one and still saved money as I could have gotten what I paid for the diff gears and sold the LSD to someone who wants to thrash it for a few months
__________________
Current Blueprint 03 xr8 ![]() 5 speed manual, Difilippo Quad Big Boy system, BPR CAI, BPR Custom tune, Underdrives 256rwkw ![]() ![]() BA manual Typhoon Fully optioned, 340rwkw@16psi (thanks Bluepower)! The old ride.... AU Fairmont, cammed beast, R.I.P you made my p plate years bearable! 150.8rwkw courtesy BPR |
||
![]() |
![]() ![]() |
![]() |
#13 | |||
.
Join Date: Mar 2006
Location: Brisbane
Posts: 6,197
|
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#14 | ||
Ford Fanatic
Join Date: Feb 2005
Location: Brisbane
Posts: 1,480
|
Hopefully your meeting goes well with them, if it does not , I say pay them via aust post money order sent to them by recipted regerstered mail, include with payment a letter stating you intend to dispute the matter with fair trading etc, and also all of what has been stated above. At the end of he letter put in something along the way of: Payment of this is made on the understanding that I am paying in order to recieve the goods back so you can make use of them, but you reserve the right to bring this letter to the attention of the court/accc/fair trading at the appropriate time. Take a photo copy of the money order also. that way you have record they recieved payment and a signature to say they recived the letter also.
__________________
Everyone is entitled to my Opinion ![]() 2007 Territory TX SY RWD Ego |
||
![]() |
![]() ![]() |
![]() |
#15 | |||
FF.Com.Au Hardcore
Join Date: Dec 2008
Posts: 1,566
|
Quote:
__________________
Current Blueprint 03 xr8 ![]() 5 speed manual, Difilippo Quad Big Boy system, BPR CAI, BPR Custom tune, Underdrives 256rwkw ![]() ![]() BA manual Typhoon Fully optioned, 340rwkw@16psi (thanks Bluepower)! The old ride.... AU Fairmont, cammed beast, R.I.P you made my p plate years bearable! 150.8rwkw courtesy BPR |
|||
![]() |
![]() ![]() |
![]() |
#16 | ||
FF.Com.Au Hardcore
Join Date: Jun 2009
Posts: 770
|
have had this once or twice and both times a punch in the mouth was the only thing that worked, after trying to resolve it in all other ways. i have no time for this cr*p or the people involved with the shafting. Now if their is anything i need done i can't do myself and some1 i trust can't do the job they get a warning before they get the car, have been refused the work but its just how it goes.
At least they know it won't be tolerated |
||
![]() |
![]() ![]() |
![]() |
#17 | ||
Mopar! But Own F6's..
Join Date: Dec 2005
Location: F6DELAIDE
Posts: 3,197
|
Pay the bill and get back at them in other ways.. Naming and shaming is first on the list..
__________________
F6 TYPHOON FPV 335 GT |
||
![]() |
![]() ![]() |
![]() |
#18 | ||
FF.Com.Au Hardcore
Join Date: May 2007
Location: Geelong
Posts: 2,374
|
Pay what you owe and tell him to undo everthing you didn't approve
|
||
![]() |
![]() ![]() |
![]() |
#19 | ||
The Destroyer
Join Date: Jun 2007
Location: Gold Coast
Posts: 2,245
|
My brother took his girlfriends magna in for a new clutch and the workshop put a brand new gearbox in it that was intended for another magna in their workshop. When he arrived to pick it up they tried to charge my brother for it saying he'd asked for a new box. A swift mention of a forthcoming right hook and all they ended up billing him for was the clutch.
My dad is acctualy a automotive engineer(out of trade for years) so him slamming his certifacate down on the counter and telling them how they should conduct themselves is usually my plan b after non threatning derogatory verbal abuse and before the need to resort to violence. As tezxr8man said it's best to forworn people to concequences before handing over the keys.
__________________
Toy- Blown XR8 Ute. Black on black "Front-drive cars are for children" Last edited by CFOUR; 23-01-2010 at 09:29 PM. |
||
![]() |
![]() ![]() |
![]() |
#20 | ||
FF.Com.Au Hardcore
Join Date: May 2008
Posts: 618
|
grab a carload of mates.
go around there and advise "here is your $1800 cash, i am taking my car" hopefully you have a spare key..... take your car and walk out. |
||
![]() |
![]() ![]() |
![]() |
#21 | ||
FF.Com.Au Hardcore
Join Date: May 2008
Location: Golden Grove, SA
Posts: 1,333
|
The thing I would be worried about is, if you leave your car there for a little while, will they be thrashing it around? Do you remember exactly how many KM's were on it?
__________________
'96 EL Fairmont Ghia 5L |
||
![]() |
![]() ![]() |
![]() |
#22 | ||
Starter Motor
Join Date: Jul 2009
Posts: 16
|
Seriously how can you be so Naive dude?
__________________
Previous XD Ute S-pac 351 ED Classic AU2 XR8 Ute AU2 XR6 Ute Current 1996 Hilux twin cab Tamworth edition Soon to be FG G6 LE |
||
![]() |
![]() ![]() |
![]() |
#23 | ||
CANT !!!!!!!!
Join Date: Jan 2009
Posts: 289
|
i came from a world where you took a bloke on his word, alot of people still live by such honour.
So its not that Stattic is naive at all, its that some FN low life abused the fact that he believed that someone he left his car with (for such a long time) could be trusted. Sorry FG G6 LE, but that was a bit harsh !!
__________________
-BA XR8 Ute- Better to be late, than VERY LATE !!!! ![]() YEAH HA !!!!!!!! ![]() |
||
![]() |
![]() ![]() |
![]() |
#24 | ||
FF.Com.Au Hardcore
Join Date: Oct 2007
Location: Brunswick
Posts: 895
|
I agree with cant.
Head over there and go off your nut. Don't take crap. Let us know how you go.
__________________
|
||
![]() |
![]() ![]() |
![]() |
#25 | ||
FF.Com.Au Hardcore
Join Date: Dec 2008
Posts: 1,566
|
You can say it's naive but I've gone there 5-6 times and haven't had a problem and u always communicate over the phone as they are 30 minute drive away so they don't give me written quotes
Yesi do have a spare set of keys I really need the car it has my GPS and other stuff i need but my dads advising me against taking the car by force Monday I will call dept of fair trading find out ny rights and if they don't like what I offer to pay them I will be getting the ombudsman to investigate asap and I will not leave the car there during the investigation as it may take a while people say we don't live in an innocent world I guess it's the last time I can take someones word for something now I will have to get written quotes every time and reiterate that I am to be informed of any extra expenses prior to work now I'll be known as one of those ball breaking customers...
__________________
Current Blueprint 03 xr8 ![]() 5 speed manual, Difilippo Quad Big Boy system, BPR CAI, BPR Custom tune, Underdrives 256rwkw ![]() ![]() BA manual Typhoon Fully optioned, 340rwkw@16psi (thanks Bluepower)! The old ride.... AU Fairmont, cammed beast, R.I.P you made my p plate years bearable! 150.8rwkw courtesy BPR |
||
![]() |
![]() ![]() |
![]() |
#26 | |||
FF.Com.Au Hardcore
Join Date: May 2008
Posts: 618
|
Quote:
your dads a smart man to exhaust all avenues first. unfortunately some people live to annoy others. big deal what this "mechanic" thinks of you. |
|||
![]() |
![]() ![]() |
![]() |
#27 | ||
FF.Com.Au Hardcore
Join Date: Jun 2008
Posts: 1,505
|
one would think that with all the stories like this that end up being publicized it would make mechanics really think twice about doing anything shonky as this type of garbage will take $ out of his back pocket and into someone elses who has a better reputation
I wish you the best of luck with this and hope you are able to reach a suitable outcome
__________________
Phantom, T56, leather and sunroof BAmk1 :yeees: Holden special vehicles - for special people ![]() |
||
![]() |
![]() ![]() |
![]() |
#28 | ||
FF.Com.Au Hardcore
Join Date: Dec 2008
Posts: 1,566
|
Thanks, I appreciate the support
I'm surprised no one has said I've done something wrong there's always someone on here with a negative attitude lol and that's it they're going to lose my future business which would have been a fair bit and I will spread my experience around telling names if they refuse to be reasonable
__________________
Current Blueprint 03 xr8 ![]() 5 speed manual, Difilippo Quad Big Boy system, BPR CAI, BPR Custom tune, Underdrives 256rwkw ![]() ![]() BA manual Typhoon Fully optioned, 340rwkw@16psi (thanks Bluepower)! The old ride.... AU Fairmont, cammed beast, R.I.P you made my p plate years bearable! 150.8rwkw courtesy BPR |
||
![]() |
![]() ![]() |
![]() |
#29 | |||
FG XR6T trayback
Join Date: Jan 2007
Location: N-W NSW
Posts: 1,308
|
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#30 | |||
Browsing here and there..
Join Date: Aug 2009
Location: Melbourne, Victoria
Posts: 2,075
|
Quote:
|
|||
![]() |
![]() ![]() |