|
21-01-2008, 03:31 PM | #1 | ||
Force Fed Fords
Join Date: Aug 2006
Location: Lysterfield
Posts: 1,914
|
Need a bit of help.
I need a couple of parts made up for my car, some bracing(?) pieces about 300mm long 20mm wide and about 3-4mm thick. Can anyone recommend someone who could do this? Must be someone in Melbourne, SE Suburbs if possible. Thanks Joel
__________________
BA XR6 TURBO 310rwkw and always chasing more Now with 6th Gear RAPID PERFORMANCE ORSM FORD CRUISER
|
||
21-01-2008, 05:18 PM | #2 | |||
fit 'n' turn
Join Date: Jan 2007
Location: Melbourne
Posts: 40
|
Hey mate i work for an engineering workshop in clayton. Draw up a sketch of what you need done and im sure i could help you out.
You can have the material at cost and a slab or two for me depending on the size of the job. Cheers Box
__________________
Quote:
|
|||
21-01-2008, 05:33 PM | #3 | |||
Force Fed Fords
Join Date: Aug 2006
Location: Lysterfield
Posts: 1,914
|
Quote:
__________________
BA XR6 TURBO 310rwkw and always chasing more Now with 6th Gear RAPID PERFORMANCE ORSM FORD CRUISER
|
|||