|
|
The Bar For non Automotive Related Chat |
|
Thread Tools | Display Modes |
05-09-2022, 07:07 PM | #8 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 21,082
|
Fixed for $8.47, I bought a two-pack of sanding belts in the Big Green Shed. 75x610mm, stripped into three 25mm bands then cut at the joining tape.
3,6m total of 25mm wide P120 emery cloth strip; this works out at about double the meterage price if you buy a 50m roll, which is what I’d expect to pay if it were sold by the roll metre. First job done; scraped, sanded all around, cleaned with Ali-Brite then rinsed, followed by a good wash with CT26 solution. Decided I could skip a transition to P180 for finishing. The questionable part has proved salvageable in situ as hoped. |
||
This user likes this post: |