EA to EB, ED tail lights?

[needaXYGT]

anyone done this before, i realise that the reverse lights are would be moved to the middle as well as changing the center part. would i need to extend the wiring for this?

[DEVL-XR]

yes can be done, i thought there was a tutorial on it somewhere but i cant find it.

PM dommuz about it.

have a look in here:
http://www.fordforums.com.au/showthread.php?t=77100

[RUQ1KA]

I done it to my first EA

You will need to move the reverse light wiring to the boot, also have to cut 2 big holes into the boot so the EB/D garnish will fit in, there was also a bit of messing around with the wiring

but the outcome was deffinetly worth it!

FROM,


TO,


Hope this helps!


Edit: i found my post on the old forums

Originally Posted by mad_ea_spac (Jr. Mad_ed_wagon :P)

yeah i got parts of the loom from the eb a bit from each of the lights and the reverse lights basically i put a big enough hole into the boot to fit the holder for the bulbs so i didn't have to silicone them in like some people do

for the reverse lights two wires had to be switched i think the two green ones other wise it is all just matching up the colours

hope i was any help!

that might help a bit!

[Damo]

I have a set of tail lights and an EB s-pac garnish for sale, if anyone is interested. :P

[eb91xr6]

love it how the second pic you have a spoiler the cars cleen and the rear garnish has been changed and look at the new exhaust, but looks 2000X better