How to wire up interior reading light console?

[fordman_01]

hey all, just picked up a interior reading light console from kcej and was wondering how to wire it up and all. its the console with 2 reading lights and a small opening compartment to put thing in. ill post a picture if u dont know what part im talking about.

thanks neil

[JC]

It's the AU2 sunglass holder.

If you don't already have wires in the headlining for the interior light, then you need to run wires up there from any other interior light. The power is common (green with yell ow stripe, IIRC), and the earth for the reading lights goes directly to earth (black wire) rather than to the door switch etc (Black wire with blue stripe). Hope that helps.

[fordman_01]

Originally Posted by JC

It's the AU2 sunglass holder.

If you don't already have wires in the headlining for the interior light, then you need to run wires up there from any other interior light. The power is common (green with yell ow stripe, IIRC), and the earth for the reading lights goes directly to earth (black wire) rather than to the door switch etc (Black wire with blue stripe). Hope that helps.

ok thanks, the lights already have the wires connected to them about 40cm. so now i just connect them to earth.

[JC]

One side to earth, the other to power.

[fordman_01]

Originally Posted by JC

One side to earth, the other to power.

ok thanks mate