cleaning throtle body

EBIIBurner · 03-07-2005, 08:38 PM

hey ppl i just have a quick question i wanna put some carby spray through my throttle body and my isc valve thing but i wanna know how to set the idle on an eb falcon cause when i put carby spray through my last car it made the idle eractic up and down (obviously cause there was so much in the TB)

sphell · 03-07-2005, 09:39 PM

the car should just idle normally again after the carby cleaner has burnt up. But if you wanna play with the idle there is a little screw on the RHS of the throttle body, screw it in to increase idle.

EBIIBurner · 03-07-2005, 09:46 PM

Quote:

Originally Posted by sphell

the car should just idle normally again after the carby cleaner has burnt up. But if you wanna play with the idle there is a little screw on the RHS of the throttle body, screw it in to increase idle.

but i thought that if you turn that screw it will idle it up but the isc will keep trying to put it back down to the set idle thats what my old car use to do go up and down it got annoying

FPVWEPN · 04-07-2005, 02:56 AM

did some of that red overspray get into the throttle body????? LOL

stockstandard · 04-07-2005, 03:03 AM

Quote:

Originally Posted by EBIIBurner

but i thought that if you turn that screw it will idle it up but the isc will keep trying to put it back down to the set idle thats what my old car use to do go up and down it got annoying

The ISC can only increase the idle from the base setting (let more air in). It cant drop the idle lower than the base setting.