|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
21-08-2009, 05:46 PM | #1 | ||
The Monty
Join Date: Oct 2007
Location: Geelong
Posts: 1,226
|
ok so first of all im ashuming the bass from the sub did most of the work to make these things vibrate:
1st is the roof lining but at the rear window end - i checked the two clips and there in as hard as i can get them, but seems to vibrate between them and i know because if i touch it doesnt do it haha 2nd and biggest pain in the Ar** is comming from the front dash it sounds as if it is in the center of the dash right above or behind the climate control unit, coz if i push down on the top of the dash it stops but i cant drive around like that haha i have even tried thumping it but due to not wanting to damage it or n e thing else i dont wanna do it. any ideas? cheers brad` |
||
21-08-2009, 06:57 PM | #2 | ||
Feel the boost
Join Date: Jun 2009
Location: Mount Gambier, SA
Posts: 283
|
brad, i have found the rattle you may have in the front is most likely the vent piece (right against the front window). My xr8 suffers from the same thing. so if ya fix it before me please do share
__________________
2005 BA Mk2 XR8 ...... Let the fun begin Drive carefully! Remember, it's not only a car that can be recalled by it's maker. |
||
21-08-2009, 08:27 PM | #3 | ||
The Monty
Join Date: Oct 2007
Location: Geelong
Posts: 1,226
|
hrmm never thought about that.. ill have alook monday arvo, work most w.e
cheers brad` |
||
21-08-2009, 08:34 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Aug 2005
Location: St John's Park NSW
Posts: 1,454
|
My AU XR6 has rattle on and off since I took the centre panel off. I have been too lazy to fix it. I AM going to fix it and I think some very skinny foam glued to the outside of the inner part of the panel will do the trick.
I haven't had the trouble with the read of the roof lining though. |
||
23-08-2009, 06:18 PM | #5 | |||
Sales Representative
Join Date: Mar 2007
Location: Young
Posts: 5,314
|
Quote:
I'm in the process of rattle finding and repairing... i found some cracked plastic around the dash mounts and p/s air bag... i since filled with an epoxy thats good for ABS plastic, let set overnight and they've gone nice and hard, filling up the cracks and stopping the rattles from them.
__________________
Project InfernoSR - Back Burner Project FeralTerra - No longer Project Fairmont Prodigy - Sold Thanks go to: MY WIFE! Bathurst Brakepro Undacar eBay!! |
|||