Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 17-01-2011, 01:26 PM   #1
MickAU3
Starter Motor
 
Join Date: Feb 2008
Location: Nowra
Posts: 2
Exclamation AUIII No cold air?

G'Day all, problem? With my air con turned on, I don't seem to be getting cold air anymore? had the Air con serviced in Nov 09, (needed re-gassing & to re-gas they had to change valves & seals to suit new type of gas which never seemed to be as good as the old gas) anyway, the outlet pipe gets extremely cold & ices up (see Pic.).

So far I’ve had the dash out (what fun) checked all cables are OK.

Hooked up a vacuum cleaner with a reduced nozzle to all the appropriate hose & all the diaphragms switch the louvers OK.

Clamped the heater hose closed, in case the valve was stuck, (although you can see it move when vacuum is applied. OK.

Disconnected the HOT/COLD louver cable & operated manually, you can here it slap side to side & operates OK.

About to look into cleaning the evaporator, but I do seem to have pretty good air flow, maybe it’s just not coming through the right channels if this is blocked with crap from the intake??

The bearing do sound like there on the way out on the compressor, but clutch engages OK, just noisy.



Attached Images
File Type: jpg auIII air.JPG (133.1 KB, 82 views)
MickAU3 is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2011, 08:28 PM   #2
Whoosha
AU DIE HARD
Donating Member1
 
Whoosha's Avatar
 
Join Date: Nov 2005
Location: Between 2nd and 5th gear
Posts: 5,073
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For all the things you do behind the scenes. Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

It is possible that it is over gassed and is freezing in the pipes before getting to the internal vents, I would be heading down to the A/C man to have it rechecked
__________________

........Age and treachery will ALWAYS overcome youth and skill.......


CORTINA 250 2V POWER soon to be AUXR8 Windsor pwrd


.............WINDSOR WARLORD WHO CARRIES THE CLEVO MAFIA AND BROKEN BOSSES...
..................................................

Quote:
Originally Posted by Riksta
Quote of the weekend: "The quarter mile wasn't as long as I expected it to be".
Whoosha is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2011, 08:34 PM   #3
Peuty
Afterburner + skids =
Donating Member1
 
Peuty's Avatar
 
Join Date: Dec 2004
Location: Skidsville
Posts: 12,152
Default

TX valve possibly
__________________
Speed Kills. So buy an AU XR8 and live forever.

Oo\===/oO
Peuty is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 09:00 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL