|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
10-12-2014, 10:48 PM
|
#1 | ||
|
Starter Motor
Join Date: Sep 2014
Posts: 2
|
first time going on this magnificent site. I have an EA speedway car half finished. bought a BF mark2 engine, question is will it fit the EA (clear the front end of the sump). Will a 5 speed 1996 gearbox and flywheel fit to the back of this BF. Am I doing the right thing by running a BF wiring loom with factory ecu to match all standard. Can anyone else tell me if I will encounter any other modification/problems (engine mounts)??
 Long live Ford |
||
|
|
|
11-12-2014, 12:44 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2012
Location: Capricornia
Posts: 827
|
It depends what division you're running in. Now, things may have changed since I was a scrutineer in the late eighties, or when I read a spec sheet a few months ago, but the engine must match the model for modified production and street stocks. Outlaw classes (not national affiliated) are another mater.
__________________
 Ya don't slow down as you get older ... you just enjoy taking longer to do it ... better!
|
||
|
|
|
|
11-12-2014, 10:29 AM
|
#3 | ||
|
Starter Motor
Join Date: Sep 2014
Posts: 2
|
dalesford speedway . yes but will it fit ?
|
||
|
|
|
|
11-12-2014, 12:18 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: May 2008
Location: Darwin
Posts: 1,694
|
Plenty of people done this change, so have a search (link is under the "Welcome, kakoschke" box).
What I remember though from reading other people's jobs is that there is something to do with the E-series K frame and the B-series sump that means it won't fit without modifying the K-frame or grinding the fins off the B-series sump. Don't hold me to that, but see how you go with a search.
__________________
1976 XB Falcon 500 Wagon - BUILD THREAD Sherwood Green | 3spd/250CI | Running Whitewalls on a 2.5" Drop |
||
|
|
|
will it fit
Linear Mode
