|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-04-2011, 12:59 PM
|
#1 | ||
|
Regular Member
Join Date: Jan 2008
Location: Australia
Posts: 187
|
Hi again...
it seems that i always have very specific questions and thats why I can't find bang on answers for my issues in the search section....although I use it a lot to inform myself a bit more... Anyways....can anybody tell me if there are better than OEM seals for an AU Falcon 4 speed auto ? I don't have the space to do the tranny oil change myself and I gave it to a service. After 2 months the tranny drips oil again. Its not dramatically but after a while I had a spot the size of a beer coaster under the car on the concrete. So are there any tranny seals that arebetter than the cheap OEM stuff that service shops use to save money ? Next time I'll bring my own seal that they can put on. Any suggestions ? cheers The Moose |
||
|
|
|
02-04-2011, 02:33 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2009
Location: Brisbane, Qld
Posts: 683
|
I haven't had a problem with protorque seals. Super cheap sell them.
|
||
|
|
|
|
02-04-2011, 02:43 PM
|
#3 | ||
|
Regular Member
Join Date: Jan 2008
Location: Australia
Posts: 187
|
Hi there...
thanks mate... i just thought that the apes of the tranni service (i didn't like them much) didn't stick to the torque specs and tightening sequence as they usually don't give a rats **** about details like that. But Ford engineers didn't come up with things like that for no reason... I guess I have to check it when the car cooled down using my electronic torque adapter. Well....I'll ask for the brand next time....do you by any chance know the difference between the seal and an OEM part? cheers The Moose |
||
|
|
|
|
02-04-2011, 04:19 PM
|
#4 | ||
|
Moderator
  
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
 
|
Is it definitely coming from the pan gasket????
It may be coming from higher up and running down around the entire/part of the pan gasket itself??? Is it on the passenger side moreso??? There's a round seal/gasket on the side of the auto (overdrive gasket I think it is) that is prome to failing after some time.
__________________
The Current Stable 2016 SZII TS Territory RWD Petrol The Evolution of the EGA54D utes AU Workshop Build thread of EGA54D B-Series Workshop Build thread of EGA54D 2004 SX TX Territory AWD - Gone but not forgotten 2010 FG XT "The ex-rental" - Moved onto a new home Mechan1k's Flickr Page |
||
|
|
|
|
02-04-2011, 04:31 PM
|
#5 | ||
|
Regular Member
Join Date: Jan 2008
Location: Australia
Posts: 187
|
Hi there...
I have to have a closer look... thanks The Moose |
||
|
|
|
|
02-04-2011, 09:55 PM
|
#6 | ||
|
Donating Member
Join Date: Dec 2004
Location: QLD
Posts: 11,841
|
Could be the rear seal?? Quite common for the bush to wear and cause the seal to leak.. The pan gaskets are all much the same and rarely give much trouble
|
||
|
|
|
|
02-04-2011, 10:16 PM
|
#7 | ||
|
Miami Pilot
 
Join Date: Jan 2005
Location: ACT
Posts: 21,704
|
More than likely the rear seal as suggested by gregaust
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
|
|
|
|
02-04-2011, 11:24 PM
|
#8 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
another vote for extension housing seal.
|
||
|
|
|
|
03-04-2011, 12:57 AM
|
#9 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
if it is the rear seal check the surface where the tailshaft yolk goes in . if there is even slight damage there it will flog out the new seal.
also look at the speedo sender unit , there is an O ring that sometimes leaks
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||
|
|
|
|
02-05-2011, 02:24 PM
|
#10 | ||
|
Regular Member
Join Date: Jan 2008
Location: Australia
Posts: 187
|
Hi folks....
well the oil pan is tight and not leaking and it seems to be leaking from the seal where the driveshaft is connected to the rear end of the transmission... How much does that cost if done in a tranny shop ? Roughly.... Thanks for any info The Moose |
||
|
|
|
|
02-05-2011, 02:54 PM
|
#11 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2009
Location: Brisbane, Qld
Posts: 683
|
Extension housing seal is the one your referring too.
Get under your car and see if the tail shaft moves up and down in the back of the gearbox. A tiny bit of movement is OK but if its a lot you might as well get the extension housing bush replaced while they are at it.
__________________
AU XLS. |
||
|
|
|
|
02-05-2011, 08:08 PM
|
#12 | |||
|
Donating Member
Join Date: Dec 2004
Location: QLD
Posts: 11,841
|
Quote:
|
|||
|
|
|
Whats the right seal
Linear Mode
