|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-01-2014, 08:45 PM
|
#1 | ||
|
DVE
Join Date: Jan 2005
Location: Hoppers Crossing, MELB
Posts: 481
|
hi everyone . trying to work out what pressure plate arp bolts I should be buying for my manual. but there are so many different ones for the 302.
anyone bought any before ? which ones are the right ones ? thanks for your help. |
||
|
|
|
09-01-2014, 11:36 PM
|
#2 | ||
|
Cat be Still !!!
Join Date: Oct 2007
Location: Perth. WA
Posts: 1,672
|
I'm running ARP Part# 671-1001
They come in pack of 5 so you will need two packs 
__________________
2002 AUIII XR8 n/a: 13.65@101.8mph. With Raptor Assist:..12.73@111.5mph. With ET Streets:......12.44@110.7mph, a one time fluke.........12.54@110mph back to back. With 3.9 Gears:.......12.40@112.5mph, still trying! Tune by XFT |
||
|
|
|
|
10-01-2014, 06:23 PM
|
#3 | ||
|
DVE
Join Date: Jan 2005
Location: Hoppers Crossing, MELB
Posts: 481
|
sweet thanks
|
||
|
|
|
| This user likes this post: |
|
20-07-2015, 09:07 PM
|
#4 | ||
|
Starter Motor
Join Date: Jul 2014
Location: Rosebud, Vic, 3939
Posts: 9
|
Hey guys any of you know the thread size and length of the pressure plate bolts for an au falcon?
__________________
when the clutch drops, the bull**** stops |
||
|
|
|
|
25-07-2015, 06:38 PM
|
#5 | ||
|
Starter Motor
Join Date: Jan 2009
Posts: 24
|
will the champion high tensile bolt you get from repco be ok for this aplication?
|
||
|
|
|
|
28-07-2015, 02:41 PM
|
#6 | ||
|
Starter Motor
Join Date: Jan 2009
Posts: 24
|
where can i get the arp bolts from?
|
||
|
|
|
|
29-07-2015, 02:17 PM
|
#7 | ||
|
Starter Motor
Join Date: Jan 2009
Posts: 24
|
will these work?http://www.ebay.com.au/itm/ARP-PRESS...item259b92873a
|
||
|
|
|
What arp bolts for AU v8 manual pressure plate
Linear Mode
