Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 01-08-2017, 10:06 AM   #1
_Ben
FF.Com.Au Hardcore
 
_Ben's Avatar
 
Join Date: Feb 2010
Location: Gold Coast
Posts: 537
Default AU2 XR6 VCT takes ~5-10 seconds of cranking to start

Hey guys,

Got an AU XR6 VCT ute with 265k ks on it, 5 speed manual (if it makes a difference) that consistently takes ages to start
This is what happens every time
- Crank for a second or two
- it splutters as it gets fuel
- not enough fuel to run, if you stop cranking it instantly stalls
- keep cranking and it'll jump to life after ~5 seconds

Its running a full exhaust (extractors, high flow cat (has a small leak around a weld), one big muffler), has a pod on the standard intake piping. I always run 98 in it, and I give it a flogging :P

So far I've done
- Replace fuel filter
- New plugs
- New leads + coilpack
- Service
- Cleaned the throttle body / intake

When its cold it seems to bunnyhop a little bit (especially while turning), but this seems to be better since I did the coilpack and leads. It did also have a misfire when going full blast in 1st sometimes, but again that seems to be fixed

Heres a video of it

https://www.youtube.com/watch?v=MxyBpOIvHwg

My thoughts are now that it could be fuel pump?
__________________
Crappy 01 AU Ute - Braaaaap
_Ben is offline   Reply With Quote Multi-Quote with this Post
Old 01-08-2017, 10:50 AM   #2
Maka
Au Falcon = Mr Reliable
 
Maka's Avatar
 
Join Date: Sep 2009
Location: North West Slopes & Plains NSW
Posts: 4,076
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Embodiment of the AFF spirit in his efforts with ACP. 
Default Re: AU2 XR6 VCT takes ~5-10 seconds of cranking to start

Is the fuel pump priming when turning the key? Anyway, the pump will prime & can still be stuffed lol.

If its cutting out around roundabouts or flooring it, the fuel pump is not delivering the appropriate fuel flow & is worn out. Probably need to replace it, good luck!

Edit, check to make sure your inlet manifold bolts are tight & the gasket is not leaking.

cheers, Maka
__________________
Ford AU Series Magazine Scans Here - www.fordforums.com.au/photos/index.php?cat=2792

Proud owner of a optioned keeper S1 Tickford Falcon AU XR6 VCT - "it's actually a better-balanced car than the XR8, goes almost as hard and uses about two-thirds of the fuel" (Drive.com 2007)
Maka is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 02:00 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL