|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
14-03-2019, 10:07 PM
|
#1 | ||
|
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,918
|
Mainly in case someone wonders how something should look, or how it goes together.
The steel brace tube or spine of it all.   Vacuum reservoir hidden in the steel brace tube.   The two halves of the lower section, and combined.       The top pad. White mess is a 2K acrylic glue made for spa repairs. Bonds nicely to ABS. I’ve also included a photo of where the centre braceback rod passes through the ducting, it was made with foam donut seals but a pair of closely abutted foam strips works as well.    I’ll add similar of the harness when that’s reinstated. |
||
|
|
| 5 users like this post: |
|
15-03-2019, 02:02 AM
|
#2 | ||
|
All Bran = Regular Member
Join Date: Feb 2006
Location: BrizVegas
Posts: 1,970
|
You ought to get a hold of a mod and see if it can be added to the Tech Resources section.
__________________
|
||
|
|
|
|
15-03-2019, 03:51 PM
|
#3 | ||
|
Regular Member
Join Date: Jan 2005
Location: vic
Posts: 436
|
Thanks for the pics.
Can you tell me if the black hex fitting where the hose connects to the reservoir looks like it unscrews ? I had the hose brake of below the black hex nut, and need to figure out how to re-attach ? 
|
||
|
|
|
|
15-03-2019, 05:21 PM
|
#4 | ||
|
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,918
|
I pulled the barbed end of the black fitting, out of the clear piece to re-tape the three fixing clips. Didn’t think to see if it was a thread the other end (gut feeling is, it’s just another barb).
|
||
|
|
|
|
15-03-2019, 06:36 PM
|
#5 | ||
|
Next upgraded Mk1 Leopard
 
Join Date: Jan 2005
Location: Sydney, in the burbs
Posts: 4,916
|
Interesting info
UK
__________________
Plastic Surgery 1 AUII Monsoon Blue How 2's: Change rear view mirror, Install backfire valve, Change foam front seats, Install auto transmission cooler, Replace Trans Shift Globe, Remove front door Trim, Paint AU headlights, install door spears, Premium Rear Parcel Shelf, go here...
 |
||
|
|
|
A Few AU Dash Panel Pictures
Linear Mode
