Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 11-10-2005, 04:06 PM   #1
BoZZa17
Lovin the Manual.
 
BoZZa17's Avatar
 
Join Date: Jan 2005
Location: Hoppers Crossing
Posts: 331
Default speaker hole sizes in au?

hey guys im from eseries =P but i have a mate who has asked me to do a stereo install into his car..
to save some time i thought id ask what size speaker holes are in au:
front doors?
and in the parcil shelf?

the parcil shelf holes look like 7.5" x 5? thats a weird size.... but anyways

thanks.

BoZZa17 is offline   Reply With Quote Multi-Quote with this Post
Old 11-10-2005, 04:14 PM   #2
LOWAU
___________
 
LOWAU's Avatar
 
Join Date: Jan 2005
Posts: 611
Default

I think they are 7*5", the range of speakers is crap for that size so you better fitting other sizes.
You can fit 6*9's at the back if you screw them in from the bottom and 6 or 6.5" splits at the front.
LOWAU is offline   Reply With Quote Multi-Quote with this Post
Old 11-10-2005, 04:23 PM   #3
BoZZa17
Lovin the Manual.
 
BoZZa17's Avatar
 
Join Date: Jan 2005
Location: Hoppers Crossing
Posts: 331
Default

are the factory holes 6'? up the front?
how can u fit one or the other?
BoZZa17 is offline   Reply With Quote Multi-Quote with this Post
Old 11-10-2005, 05:38 PM   #4
LG
FF.Com.Au Hardcore
 
LG's Avatar
 
Join Date: Dec 2004
Location: Melbourne, Victoria
Posts: 2,434
Default

All the holes are 5 x 7". They are 5x7 in the front as well. You can fit a 6, 6.5" speaker up the front. To do that, you can drill another hole and hold the speaker on by 3 screws. Or you can make a spacer, and screw the speaker on to that.

So, i'd go a set of 5x7s in the rear, something like Alpine, or JL, or Eclipse. Then some decent splits. You can mount the woofer in the A-Pillar, and get Fairmont A-Pillar moulds with the tweeter grill in it. Or you can mount the tweeter in your dash, or on your door. Or on the black plastic piece where your side mirror is.

Some brands for splits up the front are:
- Rockford Fosgate
- Pioneer
- Alpine
- MB Quart

These all range from the $200 mark to about $450. If you just want a basic system, just a 6.5" coaxial up front, or a decent 5x7, will sound fine, especially run off a headunit, with the extra power.
__________________
AUIII Falcon Forte, with SIX Appeal
LG is offline   Reply With Quote Multi-Quote with this Post
Old 11-10-2005, 06:10 PM   #5
Baboon_AU
FF.Com.Au Hardcore
 
Baboon_AU's Avatar
 
Join Date: Sep 2005
Location: Perth, Western Australia
Posts: 570
Default

in my stereo(AU ute).. i have the standard ford head(kicks butt) , an alpine 4 channel 240watt amp under the passenger seat..alpine 5x7's in the doors with the component tweeters specially mounted in the corner of the door (just near the window) and kenwood 300watt 6x9's in speaker boxes bolted to the parcell shelf from the inside of the box so it cannot be moved... simply awesome systemm..get a lot of bass from the 6x9's... btw, my parcel shelf did not have any speakers holes in it
__________________
01 AUII XLS Regency Red Ute 4.0L Egas Auto
Mods -transcooler, tickford intake, K&N pod filter, Pacemakers, 2.5 inch exhaust, Crow Cam,

1981 XD Fairmont 351 - 351 Cleveland, ARP bolts, flat top pistons, Stage 3 Dynotec cam, ported 2V heads with 4V valves, Roller Rockers, Weiand manifold, Mighty Demon, 1/2" fuel lines with blue Holley fuel pump, Crane hi-6 ignition, B&M megashifter, C4, hi-stall, shift kit, 3.77 Ford 9" LSD.

Thanks to: EvilChief and SJW Performance
Baboon_AU is offline   Reply With Quote Multi-Quote with this Post
Old 13-10-2005, 06:19 PM   #6
BoZZa17
Lovin the Manual.
 
BoZZa17's Avatar
 
Join Date: Jan 2005
Location: Hoppers Crossing
Posts: 331
Default

mmmm interesting... ta 4 the info guys
BoZZa17 is offline   Reply With Quote Multi-Quote with this Post
Old 13-10-2005, 06:42 PM   #7
shepv8
V8's for ever
 
Join Date: Aug 2005
Posts: 808
Default

I bought 5x7's. Front and rear. They bolt straight in .Dont mess around cutting holes etc.
rears are boston acoustics. $220
fronts are JBL $180. From Strathfield.
Expensive , but its worth it for less hassles
shepv8 is offline   Reply With Quote Multi-Quote with this Post
Old 13-10-2005, 07:05 PM   #8
stiddy
Banned
 
stiddy's Avatar
 
Join Date: Jan 2005
Location: Beaumont Hills
Posts: 2,536
Default

yeah what shepv8 said, 5x7's front and rear no stuffing around just screw em in..

i got myself a set of Fusion Powerplant 5x7 splits up front, and 5x7 2ways in the rear..
and i find that you get a nicer cleaner sound with matching speakers throughout, rather then 6.5's in front and 6x9's in rear..
stiddy is offline   Reply With Quote Multi-Quote with this Post
Old 14-10-2005, 01:34 AM   #9
blackers10
FF.Com.Au Hardcore
 
blackers10's Avatar
 
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
Default

for the rear do you need to remove the C pillar covers?
or can the parcel shelf just slide forward once the rear seat is folded down and the clips removed??

as i want to remove my stock sub so i can stop it bottoming out as my 2 15s thump away LOL(its not even connected)
blackers10 is offline   Reply With Quote Multi-Quote with this Post
Old 11-11-2005, 11:33 AM   #10
FalcoN 'S'
Guest
 
Posts: n/a
Default

Hiya fellow revheads, I been looking everywhere for the sizes of the speaker holes in the AU, and after ringing Ford and finding them as useless as tits on a bull, i am relieved to finally see some black and white info. But alas I am still left with a question or two.
I know that the HU is presumably a Philips one, and that it is 4 x 25 watts, or something like that.
So now that leaves me wondering, do i just buy 4 5x7's, or do i get something out of a catalogue like Pioneer 6x9's for parcel shelf, and 6's in the doors?
What is the bass response like in 5x7's? ( I am not after an earthquake everytime i turn on my stereo, just a little more punch when i play a bassy track. Will it be better to stay with the standard HU or get one that matches the speakers, like Pioneer.

Any help with this would be appreciated, thanks in advance.
BTW, I drive a 2001 AUII 'S', Black, 2.5'' cat back exhaust with single Berklee muffler, soundz in'.
  Reply With Quote Multi-Quote with this Post
Old 11-11-2005, 11:46 AM   #11
stiddy
Banned
 
stiddy's Avatar
 
Join Date: Jan 2005
Location: Beaumont Hills
Posts: 2,536
Default

my recommendation would be to put 4 5x7's all round..
its what i did, so easy to do, sound is absolutely awsome.. but there really isnt much bass from them.. better off to get a 10in sub or something for bass..

and definately getting a better headunit... something with 50x4.. the stock ford deck is crap..

ask glenau, he will tell you.. he got a new sony deck on the standard speakers and was very suprised..
i got a kenwood deck, and 4 fusion 5x7's and i couldnt be happier..
stiddy is offline   Reply With Quote Multi-Quote with this Post
Old 11-11-2005, 11:48 AM   #12
TheSneakiness
Adapt or perish...
 
TheSneakiness's Avatar
 
Join Date: Jan 2005
Location: Dip!@#$
Posts: 7,954
Default

And replace the HU. Please. Do yourself a favour.

Just got mine replaced and sound quality is far better than factory.
__________________
Carless
TheSneakiness is offline   Reply With Quote Multi-Quote with this Post
Old 11-11-2005, 12:38 PM   #13
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,704
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Reaplace the HU, and 5x7 speakers is all you need. I run a JVC HU with Pioneer 5x7s, and I get all the bass I need. I listen to AC/DC a lot, so the bass has to be reasonable, but not doof doofy!
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 11-11-2005, 01:17 PM   #14
FalcoN 'S'
Guest
 
Posts: n/a
Default

Thanks so much for the input so far guys.
I just got off the phone from Strathfield, i know another useless mob, and they tried to flog a a 12'' boxed sub aswell, for the meager price of ..... wait for it......... $798 !!!
My first thoughts were, YOU GOTTA BE KIDDING ME, I want a car stereo that sounds cool, not a freaking night club!!
Then i was also told by another mob, that the AU HU was intergrated, somehow, into the cars computer and couldn't be removed, what a joke, and now the missus is pulling in the reigns of my trusty idea steed. Not a good thing, lol.

So, 5x7's all round,eh? Do i need the 8'' sub in the parcel aswell, or is the 4 speakers fine? and do they need to be amped, coz thats also what i been told, even with the standard speakers, GET AN AMP.
So very thankful, but still a little muddled.
Much thanx so far........
  Reply With Quote Multi-Quote with this Post
Old 11-11-2005, 01:28 PM   #15
blackers10
FF.Com.Au Hardcore
 
blackers10's Avatar
 
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
Default

to run the sub you need the double din headunit with teh stacker in it

and you need the premium sound system amp in the right side of the boot behind the covers
and all acompanying wireing

the stock premium stereo is better than most ive heard

but an aftermarket headunit is definatly a good investment (especially if you get an MP3 deck)

good luck bud
blackers10 is offline   Reply With Quote Multi-Quote with this Post
Old 11-11-2005, 01:29 PM   #16
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,704
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Someone obviously got mixed up between an AU and a BA with the integrated HU. Probably the first time that's ever happened.

No point amping the standard headunit with stock speakers. The stockies are only 10 or 15W, so amping them will just give worse sound.

My suggestion is to fit the 5X7s all round and see what YOU think of the sound. Adjust the bass on the headunit, and I think you will be surprised at how good it sounds. If it's not enough, then you can amp it and sub it as well. Just note that to fit an amp, you will need a decent set of Line Out Converters (LOCs) to turn the speaker wire output on the headunit into an RCA input for the amp. Mount the LOCs as close to the amp as you can - ie legthen the speaker wire rather than using long RCAs. (This advice comes from Pyroay, an award winning audio enthusiast).

Pioneer make a set of 5x7s for around $150 a pair - I have them in my car and I am more than happy with them, but there are plenty of brands and prices around - here's the list I posted in another thread.

Speakers: Listed in rough price order
Aerpro APS57 @ around $20 - $25. They are better than standard but that's about it.
Kicker 05ES68 @ $99
JBL GTO8626 @ $129
Pioneer TSA 5713 @ $149
Clarion SRC5715 @ $149 (Use Quick Product Search to search on SRC5715)
Boston S85 @ US$120 (approx $160)
Polk Audio DB570 @ US$120 (approx $160)
JL Audio TR570-CXi @ $189 and the ZR570-CSi (Special order) @ $1489 pair - not a misprint!!
Boston NX87 @ US$180 (approx $240)
JBL P75 @ $249.00.
Clif Designs PX5.7 @ $249.00.
Phoenix Gold TX57.0COAX @ $249.00.
Polk Audio MMC570 @ US$200 (approx $265)
Blaupunkt TSx 573 (couldn't get a price for these)
Rockford Fosgate T682S/T1682S this is a 6x8 which apparently fits in the 5x7 space - somehow. Couldn't find a price easily.
Infinity REF6810CS this is a 6x8 but lists 5x7 as well!?! No price.
Eclipse SE8375 No price.
Alpine SPR-571A No price.
Alpine SPR-57LS & SPR-57LP No price.

I have the Pioneer and am very happy with them. Also, most 6" and some 6.5" speakers will also fit in the 5x7 holes in the doors and parcel shelf, but obviously you would need to drill new screw holes to mount them and you need to be sure they are not too deep. I had a pair of 6.5" US Audio speakers in the front of my AU1 XR6.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT

Last edited by JC; 11-11-2005 at 01:38 PM.
JC is offline   Reply With Quote Multi-Quote with this Post
Old 11-11-2005, 06:04 PM   #17
FalcoN 'S'
Guest
 
Posts: n/a
Default

Once again, thank you for all of your help, and JC THANKS HEAPS for the speaker list, if i can't get a set or 2 out of that, well frankly, i needn't bother with another post about this matter at all............ LMFAO PMSL.
Well it looks like I might be getting a new HU after all:

http://www.repcoshop.com.au/ASP/Cata...age3.asp#Start

Its the top left one, so please let me know if its any good from the specs, or if you own it, let me know how it is.
I like the look of the JBL 5x7's, i can get them for about $120 a pair.
As a sound engineer myself, I know that JBL are a reputable brand and an excellent source when it comes to sound stage equipment, but as I am not an Auto Electrician, I am not sure about the car audio side of the company.
If i can get a decent enough bass out of this setup , I will be truly happy with the price, as the only install i will have to pay for will be the HU.

Hope to hear back from you all soon, once again THANKS HEAPS.
  Reply With Quote Multi-Quote with this Post
Old 11-11-2005, 07:07 PM   #18
HLC
Audi S3
 
Join Date: May 2005
Location: Sydney.
Posts: 8,307
Default

Quote:
Originally Posted by JC-XRWgn
Reaplace the HU, and 5x7 speakers is all you need. I run a JVC HU with Pioneer 5x7s, and I get all the bass I need. I listen to AC/DC a lot, so the bass has to be reasonable, but not doof doofy!
this is a man who knows good music! :




um, in the Fairmonts, i got the tweeter grills in the A-pillar, but are there tweeter actually installed in the stock sound system. not the premium one :|
__________________
HLC is offline   Reply With Quote Multi-Quote with this Post
Old 11-11-2005, 07:15 PM   #19
MrAUII
Regular Member
 
MrAUII's Avatar
 
Join Date: May 2005
Location: Out North, Country SA, SA
Posts: 127
Default

Im a fan of DLS speakers
www.dls.se
__________________
AUII Forte 4.0L - AUSOM3
Audio Visual Incar Entertainment
MrAUII is offline   Reply With Quote Multi-Quote with this Post
Old 11-11-2005, 07:29 PM   #20
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,704
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

: DLS Speakers added to the list
Speakers: Listed in rough price order
Aerpro APS57 @ around $20 - $25. They are better than standard but that's about it.
Kicker 05ES68 @ $99
JBL GTO8626 @ $129
Pioneer TSA 5713 @ $149
Clarion SRC5715 @ $149 (Use Quick Product Search to search on SRC5715)
Boston S85 @ US$120 (approx $160)
Polk Audio DB570 @ US$120 (approx $160)
JL Audio TR570-CXi @ $189 and the ZR570-CSi (Special order) @ $1489 pair - not a misprint!!
Boston NX87 @ US$180 (approx $240)
JBL P75 @ $249.00.
Clif Designs PX5.7 @ $249.00.
Phoenix Gold TX57.0COAX @ $249.00.
Polk Audio MMC570 @ US$200 (approx $265)
Blaupunkt TSx 573 (couldn't get a price for these)
Rockford Fosgate T682S/T1682S this is a 6x8 which apparently fits in the 5x7 space - somehow. Couldn't find a price easily.
Infinity REF6810CS this is a 6x8 but lists 5x7 as well!?! No price.
Eclipse SE8375 No price.
Alpine SPR-571A No price.
Alpine SPR-57LS & SPR-57LP No price.
DLS 257 No price
DLS 457 No price
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 11-11-2005, 08:39 PM   #21
rag top
FF.Com.Au Hardcore
 
rag top's Avatar
 
Join Date: Dec 2004
Location: ACT
Posts: 4,028
Default

JC,

Does the wagons use the same size speakers in the rear as the sedans?
__________________
Current Rides:
2000 AU 5L XLS ute; 1970 Mustang project
rag top is offline   Reply With Quote Multi-Quote with this Post
Old 11-11-2005, 09:00 PM   #22
xr8 007
FF.Com.Au Hardcore
 
xr8 007's Avatar
 
Join Date: Mar 2005
Posts: 1,761
Default

silly question!! Do i have to pull the doors apart to get to my front speakers???
xr8 007 is offline   Reply With Quote Multi-Quote with this Post
Old 11-11-2005, 09:18 PM   #23
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,704
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

'67 - the rears are 4" round, I think (about 90% sure). Just pop the speaker cover off and measure them - the cover comes off very easily.

xr6007 - Yes.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 13-11-2005, 01:12 AM   #24
LG
FF.Com.Au Hardcore
 
LG's Avatar
 
Join Date: Dec 2004
Location: Melbourne, Victoria
Posts: 2,434
Default

If your going to go a fairly good system, be sure to get splits up front. And use 5x7s for the rear fill.

Otherwise if you just want a nice replacement system, that you can turn up and not cost you too much. Do as JC suggested and get all aftermarket 5x7s, and for a bit of volume, you'll need an amp, or a headunit (or both).

Cheers
__________________
AUIII Falcon Forte, with SIX Appeal
LG is offline   Reply With Quote Multi-Quote with this Post
Old 13-11-2005, 09:26 AM   #25
rag top
FF.Com.Au Hardcore
 
rag top's Avatar
 
Join Date: Dec 2004
Location: ACT
Posts: 4,028
Default

Quote:
Originally Posted by JC-XRWgn
'67 - the rears are 4" round, I think (about 90% sure). Just pop the speaker cover off and measure them - the cover comes off very easily.
Thanks JC
__________________
Current Rides:
2000 AU 5L XLS ute; 1970 Mustang project
rag top is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:36 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL