Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > OzECruisers (E/N/D Series) > OzECruisers General Discussions

OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS

Reply
 
Thread Tools Display Modes
Old 20-10-2005, 03:41 PM   #1
the5thduke
Starter Motor
 
Join Date: Oct 2005
Posts: 7
Default el xr6 dash suround

hi all ,ive found 3 screws upper and two screws lower holding the platic dash suround in,but over by the stereo side its very tight like there are more screws but damned if i can find them,im tryin to get to a very annoying rattle that seams to be comming from directly behind the air con controller.any advise will be helpfull thnx in advance.

the5thduke is offline   Reply With Quote Multi-Quote with this Post
Old 20-10-2005, 07:07 PM   #2
PULLY6
FF.Com.Au Hardcore
 
PULLY6's Avatar
 
Join Date: Mar 2005
Location: Adelaide Hills
Posts: 1,464
Default

Take the ashtray out, then there is a large screw to the right of the now empty ashtray openeing.

Then you can remove the radio surround, behind which there are two more screws to take out the plastic surround. Be careful to unplug all plugs before you pull it too far off.

You installing a head unit?
__________________
1998 Ford Fairlane - 4.0L
18x8 RJR rims - Tinted - King Suspension - 2.5" D&T Cat Back Exhaust
PULLY6 is offline   Reply With Quote Multi-Quote with this Post
Old 20-10-2005, 07:21 PM   #3
the5thduke
Starter Motor
 
Join Date: Oct 2005
Posts: 7
Default

thanx for that pully,ive got a rattle comming from the centre dash area and its destroying my driving pleasure,im praying i will find it with the surround off cause i aint got the bottle for a dash out drama,cheers again
the5thduke is offline   Reply With Quote Multi-Quote with this Post
Old 20-10-2005, 07:48 PM   #4
PULLY6
FF.Com.Au Hardcore
 
PULLY6's Avatar
 
Join Date: Mar 2005
Location: Adelaide Hills
Posts: 1,464
Default

No worries mate. Rattles suck in these cars, and they're a bastard to find, not that you wanna hear it...

Have you had it lowered? That causes rattles a lot of the time. I've got the really harsh metal-on-metal squeak that sets my teeth on edge. It crops up occasionally, but I can never find it. Gives me the s!

Try tightening up every screw you can lay your hands on.... or just turn the stezz up a bit.
__________________
1998 Ford Fairlane - 4.0L
18x8 RJR rims - Tinted - King Suspension - 2.5" D&T Cat Back Exhaust
PULLY6 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:18 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL