|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
02-04-2005, 09:47 AM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Sydney N.S.W
Posts: 505
|
Hey guys,
I'm having a little bit of a problem with the front brakes on the EF. Ever since I had the calipers off to change the springs, the front brakes squeal and sqeak unless my foot is ON the brake. I have pulled everything back apart and cleaned it out and sprayed a bit of WD40 around, it seemed to work for about half an hour then the problem came back. Does this sound like a seized caliper or something?? Any ideas on how to fix it, it's extremely embarrasing! lol Daniel
__________________
2003 Narooma Blue BA XR6 5spd Manual. Pacemaker 4490 Extractors 2.5" Exhaust High Flow Cat SS Inductions "Growler" CAI Underdrive Pulley Mal Wood H/D Clutch Custom Tune 18" XHP Sabre's 12" Kicker Sub 169.2 rwkw
|
||
|
|
|
02-04-2005, 10:18 AM
|
#2 | ||
|
Banned
Join Date: Dec 2004
Location: South East Melbourne
Posts: 6,156
|
You had the calipers off to do springs? Eh?
Pull them apart, clean the lot with proper brake cleaner and lube the slides with copper lube. |
||
|
|
|
|
02-04-2005, 11:11 AM
|
#3 | ||
|
Custom user title
Join Date: Jan 2005
Posts: 1,892
|
are the steel shims still in place where the pads slide... make sure these are still there.. As rob said pull the slides out from the caliper and use either the copper lube, even htb grease if u have none of the other.. ive seen even rubber grease work good. U may find one of the slides is stuck VERY common. Also wd40 has no place near any brake set up, the heat from the brakes will evaporate it quick as
|
||
|
|
|
|
02-04-2005, 11:34 AM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Sydney N.S.W
Posts: 505
|
Thanks for the tips guys. The shims are still there, I made sure of that. The WD40 wasn't to stop the squeak as such, I was trying to free up what ever is stuck.
Just went to supercheap and got some brake cleaner and some of the red stuff to put behind the pads. I'll get some grease and have a crack after lunch and see what happens.
__________________
2003 Narooma Blue BA XR6 5spd Manual. Pacemaker 4490 Extractors 2.5" Exhaust High Flow Cat SS Inductions "Growler" CAI Underdrive Pulley Mal Wood H/D Clutch Custom Tune 18" XHP Sabre's 12" Kicker Sub 169.2 rwkw
|
||
|
|
|
|
02-04-2005, 03:06 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Sydney N.S.W
Posts: 505
|
Seems to be ok now, I pulled the slides out with great difficulty and cleaned them and greased them all up, they now move nice and freely. I also put that red stuff behind the pads and it seems to have done the trick.
__________________
2003 Narooma Blue BA XR6 5spd Manual. Pacemaker 4490 Extractors 2.5" Exhaust High Flow Cat SS Inductions "Growler" CAI Underdrive Pulley Mal Wood H/D Clutch Custom Tune 18" XHP Sabre's 12" Kicker Sub 169.2 rwkw
|
||
|
|
|
Sqeaky Brakes
Linear Mode
