I finally got another car!

[toby123]

Well after righting off my Turbo'd EF Fairmont 4 weeks ago I finally got another car on friday!

Its a White EB Falcon Spac, 5 Speed, LSD, 270,000k's.

For what I pay'd for it, It wasnt a bad buy.
I have a few questions to ask though:
-Will my diff gears out of my EF fit?
-Are short shiter kits available for them and how much
-Is converting it to twin thermos a hard job?
-Will my slotted rotors from my EF fit on the front?

Any help would be muchly apreciated.
I'll think of more things and post them when they come to me.

Thanks

Toby

PICS!

[neb]

-Will my diff gears out of my EF fit?
maybe what ratio diff is in there now? is it an EB or EBII?

Are short shiter kits available for them and how much
yes svo make a short shifter kit, or bpt sell shorter gear sticks which are very good and a good price (site sponsor)

Is converting it to twin thermos a hard job?
its not very hard check out this website i made on it: http://users.tpg.com.au/adsleq58/thermo/index.htm

Will my slotted rotors from my EF fit on the front?
i'm pretty sure they will.. but i dont know for sure

[RUQ1KA]

Originally Posted by neb

-Will my diff gears out of my EF fit?
maybe what ratio diff is in there now? is it an EB or EBII?

i dont think the diff will fit as the hand brake in ef/l's is different to ea-d thats what i heard the problem was

[ilsautomotive]

We want pics! Whether it's 3.9 or 4.0 they're rare as hen's teeth.

Tommi, the internal gears should still swap over, the only issue could be that the series 1 and earlier had 25 spline axles.

[toby123]

ah cool thanks guys for the info! and also, i didnt think the diff;s would swap over i just want my gears (3.73's) out of the ef diff.

ITs a 4.0, does that mean its a series 2?

And pics will come as soon as i find my digi cam

I was so stoke when i got the call from dad saying he found a EB 5 speed!

Any way willl post pics soon!

Thanks again!

Toby

[TIKFD6]

Gears will swap over, as long as the spline is the same.
SVO Lightening Shifter will make the gearbox feel very noce.
I wouldnt be without mine.

[old_mate]

toby, congrats on becoming a 3 pedal peddler

Are you parting out your EF?

[MickyB]

Yes a 4 Litre means it is a Series 2, in manual format they are great car to start something special with.

[b2tf]

If it doesnt have ABS the brake rotors from your EF wont fit, assuming it had ABS. 99.9% of them do though, and im pretty sure all Fairmonts did.

[EF302]

Originally Posted by back2thefutura

If it doesnt have ABS the brake rotors from your EF wont fit, assuming it had ABS. 99.9% of them do though, and im pretty sure all Fairmonts did.

abs is an option in the falcon s, xr's and fairmonts were standard

[ilsautomotive]

ABS was only standard on on the EB Ghias and XRs (series II) and was optional on all others. All EFs except the GLi had it. The S in question just might have it.

[Walkinshaw]

Is the turbo motor being transplanted???

I hadnt heard from you in a while, was wondring how the blown EF was going.

[toby123]

A couple more Q's

Will my EF alternater fit straight on? as i dont think the little 70 amp alt will charge the standard battery and 2 optima YT's to well

And whats the shortest throw shocks available for the E Series? as i have U/Lows but want shorter shocks before i fot them.

Dan, I was a ******** and it bit me on the ****! literally! The power it had was awsome! I want to get a few debts out of the way then the turbo stuff will be going on.

old_mate, I have a few bits and pieced's left from the monty, mainly interier stuff and a few body panels.

Thanks

Toby

[old_mate]

Toby you have PM

[EFFalcon]

can't change the alternator without putting the full EF/EL belt setup on.
rotors will go on no probs, we've fitted EF ghia rotors to an EA before, might just need different wheel nuts.

[toby123]

Uodated first post with a couple pics.

There is a couple of things needed doing.
-Front bumper needs to be re clipped on on the passenger side
-rear bumper is sagging a little bit on the drivers side (if i tak eit off and re-fit it will that fix it or is there a way to fix it?)
-Back window needs retinting

It was an absalute bargain considering the nick its in, the interier is in awsome condiion(digi cam ran out of battery before i could get any pics, except for the shifter :P )

Toby

[toby123]

hey guys!
Took the EB down to QM tonight and did a couple of runs,

Best was:
16.139 @ 86.12mph. 60' 2.497

Im happy with that from a dead stock EB.

Toby

[EFFalcon]

mmm the 5 speed deffinately helps that thing mumbo down the 1/4
good stuff!

[PULLY6]

nice one bro! any woodgrain interior bits available from the monty?

[toby123]

Originally Posted by PULLY6

nice one bro! any woodgrain interior bits available from the monty?

NAh sorry mate, no woodgrain.

[TUFED6]

The diff should fit. I had an LSD EF diff in my Falcon for a while. You just need to pull the brakes/caliper mounts off your EB diff and bolt them up to the EF housing.

The sway-bar mount is a little bit different, but I got around that by using a different bolt.

If you just want to change the internals they should be identical.

- John

[toby123]

Ah cool, yeah just want to put the 3.7's in this housing as the EB is already LSD, My EF had a mini spool in it so i just want the gears.

Thanks
Toby