|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
08-04-2005, 10:43 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Melbourne
Posts: 1,382
|
posting this on behalf of sunny cause he can't log in for some reason...
he has decided to buy a microfueller to control an extra injector for the turbo. He was wondering how this particular microfueller would be adjusted:  would there be a dial on the other side of the case that you could increase/decrease the fuel delivery? Also how effective are these things for a low boost (less than 10psi) setup? |
||
|
|
|
08-04-2005, 10:55 PM
|
#2 | ||
|
FF.Com.Au Hardcore
 Join Date: Jan 2005
Location: Melbourne
Posts: 2,224
|
There's a screw on the side which you can adjust.
__________________
1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Cooler|Sports ryder shocks|Pedders lows|Resprayed|Microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Turbo grind cam|Crow double valve springs|1.3mm MLS headgasket|C4 Conversion|Built bottom end|Custom plenum|10.6@125MPH |
||
|
|
|
|
08-04-2005, 10:57 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Melbourne
Posts: 1,382
|
i saw that but thought it was just holding the case! cheers knackers.
|
||
|
|
|
|
08-04-2005, 10:59 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Melbourne
Posts: 2,224
|
Nah not that one! there's another one on the side.
__________________
1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Cooler|Sports ryder shocks|Pedders lows|Resprayed|Microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Turbo grind cam|Crow double valve springs|1.3mm MLS headgasket|C4 Conversion|Built bottom end|Custom plenum|10.6@125MPH |
||
|
|
|
|
08-04-2005, 11:00 PM
|
#5 | ||
|
Banned
Join Date: Dec 2004
Posts: 4,078
|
lol.
Sik. Will it be boosting on monday ? |
||
|
|
|
|
08-04-2005, 11:01 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Melbourne
Posts: 2,224
|
 The guy just sent an email back :P
__________________
1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Cooler|Sports ryder shocks|Pedders lows|Resprayed|Microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Turbo grind cam|Crow double valve springs|1.3mm MLS headgasket|C4 Conversion|Built bottom end|Custom plenum|10.6@125MPH |
||
|
|
|
|
08-04-2005, 11:02 PM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Melbourne
Posts: 1,382
|
it's boosting now..but melting wires in the process
 Gotta get some heat sheilding sorted. Hopefully this thing will make a big improvement. I just bought a wideband AF meter for tuning purposes so we can use that to get the mixture right....can't wait 
|
||
|
|
|
|
08-04-2005, 11:03 PM
|
#8 | |||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Melbourne
Posts: 1,382
|
Quote:
how much is it gilly? Last edited by sphell; 08-04-2005 at 11:04 PM. Reason: took out pic |
|||
|
|
|
help with microfueller
Linear Mode
